DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer


PRODUCT HIGHLIGHTS

  • Supports Cameras up to 8 Pounds
  • Precision of Control: ±0.02°
  • Transmitter for Remote Pan/Tilt Control
  • Tool-Less Balance Adjustment System
  • Assistant Software for iOS and Windows
  • Bluetooth Wireless Interface for Setup
  • Silent Mode For Quiet Operation
  • USB and PowerTap Power Outputs

$2,499.00
Sold Out - Backorder Available


$2,499.00
Sold Out - Backorder Available



The Ronin-M 3-Axis Handheld Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 8 pounds, the Ronin-M uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan.

The system is computer-controlled and features a tilt range of 105⁰ up / 165⁰ down plus a roll range of ±110⁰. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.
 

As with sled and vest style stabilizers, motorized gimbal systems require balancing before use. Once balanced, you can configure the Ronin-M for your particular camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. Because every camera and lens combination has a different mass and weight distribution, there is an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned. A gimbal tuning stand is provided so you won't have to hand-hold the rig during this process.

The included 4S lithium-polymer battery powers the Ronin-M for up to six hours. It is a "smart" battery, meaning power regulation and protection circuitry is built-in and there is no separate balancing lead, unlike many lithium-polymer batteries. A charger is also included, and it is important to always use chargers designed for the Ronin-M battery because of the smart circuitry. Two 12V DC PowerTaps and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin-M battery to simplify your charging regime and avoid unnecessary added weight.

(04-DJI-RONIN-M)

PRODUCT HIGHLIGHTS

  • Supports Cameras up to 8 Pounds
  • Precision of Control: ±0.02°
  • Transmitter for Remote Pan/Tilt Control
  • Tool-Less Balance Adjustment System
  • Assistant Software for iOS and Windows
  • Bluetooth Wireless Interface for Setup
  • Silent Mode For Quiet Operation
  • USB and PowerTap Power Outputs

Built-In Functions    
Three Operation Modes

  • -Underslung Mode
  • -Upright Mode
  • -Briefcase Mode

Built-in, independent IMU module
DJI Specialized Gimbal Drive Motors with Encoders
Bluetooth Module
USB Connection
2.4GHz Receiver
Temperature Sensor
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported


MECHANICAL & ELECTRICAL CHARACTERISTICS
Working Current

  • Static current: 300mA (@16V)
  • Dynamic current: 600mA (@16V)
  • Locked motor current: Max 10A (@16V)

Operating Temperature    5° F ~ 120° F (-15° C ~ 50° C)
Weight    2.3kg (5.07lb) fully loaded with handlebar
Gimbal Dimensions    500mm(W) x 210mm(D)x 420mm(H)

PERIPHERAL
Camera Tray Dimensions

  • Maximum depth at center of mass on camera base plate: 120mm
  • Maximum height measured from top of camera base plate: 195mm
  • Maximum width: 160mm

Accessory Power Connections    12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power    4S Ronin-M Battery
Connections    2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements 

  • Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit);Mac OS X 10.9 or above

Mobile Assistant Software Requirements    Mobile Device: iOS 6.1 or above, Android 4.3 or above

WORKING PERFORMANCE
Load Weight (Reference Value)    8lb (3.6kg)
Angular Vibration Range    ± 0.02°
Maximum Controlled Rotation Speed

  • Pan axis: 90°/s
  • Tilt axis: 100°/s
  • Roll axis: 30°/s

Mechanical Endpoint Range 

  • Pan axis: 360°
  • Tilt axis: +105° to -190° 
  • Roll axis: ± 110°

Controlled Rotation Range

  • Pan axis control: 360°
  • Tilt axis control: +105° /-190° 
  • Roll axis control: ± 25°
SKU 04-DJI-RONIN-M
Barcode # 04-DJI-RONIN-M
Brand DJI

Be The First To Review This Product!

Help other Camera Electronic users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category