DJI Ronin-MX 3-Axis Gimbal Stabilizer


PRODUCT HIGHLIGHTS

  • Supports Cameras up to 10 Pounds
  • Compatible with Matrice 600
  • Robust Magnesium Construction
  • Radio Controller for Second Operator
  • iOS / Android App-Based Control
  • SmoothTrack Technology
  • Upright, Underslung, and Briefcase Modes
  • Supports Mounting of Second DJI Battery
  • USB and D-Tap Power Outputs
  • Universal Mount for Jibs, Car Mounts

$2,799.00
Sold Out - Backorder Available


$2,799.00
Sold Out - Backorder Available



ENGINEERED FOR PROFESSIONALS
Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has 
been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack™ 
algorithms ensure movements are smooth in every configuration. A repositioned battery improves 
balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and 
at the bottom. Silent motors prevent on set mics picking up motor noise.

 

POWERFUL AND ACCURATE
Designed to resist high G-forces using powerful motors and IMUs, the Ronin-MX is engineered to maintain stability and hold horizon when mounted to an aircraft or a vehicle. When mounted to the M600 aerial system, it communicates directly with DJI’s flight controller and when attached to vehicles, it connects to an optional GPS module allowing it to stabilize actively for a smoother shot.

 

FREEDOM TO MOVE
A slip ring allows the Ronin-MX to rotate 360° continuously when mounted to aircraft or vehicles, opening up more creative options. This is further enhanced by an increase in tilt axis range from 90° straight down and beyond to 135°. Popular features of the Ronin series such as the three modes of operation and SmoothTrack™ are also present, giving film makers a range of creative angles and movements.

WIRELESS CONTROL AND TRANSMISSION
The Ronin-MX is compatible with Lightbridge 2, providing long-range HD video transmission from the air to the ground from up to 3.1miles (5km) away. If combined with the optional DJI Focus and Focus Expansion Module, focus or aperture can also be pulled remotely with a twist of the wrist. An optional Remote Start/Stop add-on provides the ability to control shooting on a range of airborne cameras.

COMPREHENSIVE APP CONTROL
Using DJI Assistant and the dedicated Assistant app for iOS and Android allows complete customization of the Ronin-MX and its behavior. If connected to Lightbridge 2, the DJI GO app can be used to control how the M600 flies including Intelligent Flight Modes, remote control modes, move the gimbal and see an HD live feed from the camera.


 

(04-DJIRONIN-MX)

PRODUCT HIGHLIGHTS

  • Supports Cameras up to 10 Pounds
  • Compatible with Matrice 600
  • Robust Magnesium Construction
  • Radio Controller for Second Operator
  • iOS / Android App-Based Control
  • SmoothTrack Technology
  • Upright, Underslung, and Briefcase Modes
  • Supports Mounting of Second DJI Battery
  • USB and D-Tap Power Outputs
  • Universal Mount for Jibs, Car Mounts

Built-In Functions
Operation Modes

  • -Underslung Mode
  • -Upright Mode
  • -Briefcase Mode
  • -Aerial Mode
  • -Jib or Wirecam Mode

Built-in, independent IMU module
DJI Specialized Gimbal Drive Motors with Encoders
Bluetooth Module
USB Connection
2.4GHz Receiver
Temperature Sensor
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported

MECHANICAL & ELECTRICAL CHARACTERISTICS
Working Current

  • Static current: 300mA (@16V)
  • Dynamic current: 600mA (@16V)
  • Locked motor current: Max 10A (@16V)

Operating Temperature    5° F ~ 120° F (-15° C ~ 50° C)
Weight  

  • Including handle bar: 6.11 lb (2.77 kg)
  • Including vibration absorber: 4.74 lb (2.15 kg)

Gimbal Dimensions

  • Excluding handle bar : 
  • 280 mm (W) x 370 mm (D)x 340 mm (H)
  • Including handle bar : 
  • 560 mm (W) x 370 mm (D) x 440 mm (H)


PERIPHERAL
Camera Tray Dimensions 

  • Maximum depth from the center of gravity on camera base plate: 120mm
  • Maximum height measured from top of camera base plate: 130mm
  • Maximum width: 160mm

Accessory Power Connections    12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power    4S Ronin-M Battery
Connections    2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements    Windows XP or above; Mac OS X 10.9 or above
Mobile Assistant Software Requirements    iOS 7.1 or above; Android 4.3 or above

WORKING PERFORMANCE
Load Weight (Reference Value)    10 lb (4.5 kg)
Angular Vibration Range    ± 0.02°
Maximum Controlled Rotation Speed

  • Pan axis: 200°/s
  • Tilt axis: 100°/s
  • Roll axis: 30°/s

Mechanical Endpoint Range 

  • Pan axis control: 360°
  • Tilt axis control: +270° to -150° 
  • Roll axis control: ± 110°

Controlled Rotation Range 

  • Pan axis control: 360°
  • Tilt axis control: +45° to -135° 
  • Roll axis control: ± 25°
SKU 04-DJIRONIN-MX
Barcode # 04-DJIRONIN-MX
Brand DJI

Be The First To Review This Product!

Help other Camera Electronic users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category