{"title":"Benro","description":"","products":[{"product_id":"benro-slim-video-tripod-kit-aluminum","title":"Benro SLIM Video Tripod Kit (Aluminum)","description":"\u003cp\u003eThe \u003cstrong\u003eBenro SLIM Video Tripod Kit\u003c\/strong\u003e features a quick to set up, quick to adjust, ultra-lightweight tripod that you can easily carry with you. The kit consists of the tripod, a video head, and a soft case. The tripod supports up to 5.5 lb loads and is suitable not only for mirrorless and DSLR cameras but also for smartphones (optional smartphone mount required).\u003c\/p\u003e\u003cp\u003eThe tripod has four leg sections and reaches a max height of 57 inch with the center column raised. In many cases, this tripod might be the ideal solution for you, considering how easy it is to bring along and that for many applications it's fully sufficient. The folded height is 20.5 inch, and with the legs being very slim, the tripod is very compact when folded.\u003c\/p\u003e\u003cp\u003eThe legs are designed with anodised aluminum twist locks that only require a half-turn to lock and unlock, allowing you to set up and pack away quickly. Moreover, each leg can be positioned individually so that you can easily find balance on uneven surfaces. The legs are outfitted with fixed rubber feet.\u003c\/p\u003e\u003cp\u003eThe video head offers smooth damping for both pan and tilt movements. It features an adjustable pan bar and an Arca-Swiss style camera plate with a D-ring 1\/4 inch-20 mounting screw.\u003c\/p\u003e\u003cp\u003eThe center column prevents twisting when in use and can be reversed for low-to-the-ground shots. A weight hook is located on the bottom end of the center column for attaching a sack or other weight in windy conditions. Bubble levels for finding balance are available on both the tripod and the video head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSLIM video tripod, video head, and soft case\u003c\/li\u003e\n\u003cli\u003eAdjustable pan bar\u003c\/li\u003e\n\u003cli\u003eQuick release camera plate with a D-ring 1\/4in-20 mounting screw\u003c\/li\u003e\n\u003cli\u003eAluminum construction\u003c\/li\u003e\n\u003cli\u003e5.5 lb payload\u003c\/li\u003e\n\u003cli\u003eSmooth damping pan and tilt movements\u003c\/li\u003e\n\u003cli\u003eFour leg sections\u003c\/li\u003e\n\u003cli\u003e57in max height with the center column raised\u003c\/li\u003e\n\u003cli\u003e20.5in folded height\u003c\/li\u003e\n\u003cli\u003eHalf-turn twist lock leg locks\u003c\/li\u003e\n\u003cli\u003eIndividual leg positioning\u003c\/li\u003e\n\u003cli\u003eWeight hook on the bottom of the center column\u003c\/li\u003e\n\u003cli\u003eFixed rubber feet\u003c\/li\u003e\n\u003cli\u003eBubble levels on the tripod and video head\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":44578411610389,"sku":"TSL08AS2CSH","price":269.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/tsl08as2csh_1.jpg?v=1773973652"},{"product_id":"benro-bv4-pro-video-tripod-kit","title":"Benro BV4 Pro Video Tripod Kit","description":"\u003cp\u003eThe \u003cstrong\u003eBenro BV4 Pro Video Tripod Kit \u003c\/strong\u003eIncludes a Benro BV4 head and a 2-stage\/3-section tripod with removable mid-level spreader. The system can support cameras and accessories up to 8.8 pounds and features a 75mm ball\/bowl fitting for stability. The head features a 6-step (1 to 5 plus 0) counterbalance system to dials in the correct amount for your setup, and independent 4-step (1 to 3 plus 0) pan and tilt drag settings for precise control over camera movements. A Manfrotto 501\/504PL compatible sliding quick release plate is provided, making it easy to set the balance point for your gear.\u003c\/p\u003e\u003cp\u003eThe 2-stage, 3-section twin leg aluminum tripod incorporates a 75mm bowl and offers sturdy support for the BV4 head. It features oversized quick positive leg locks for simple and fast setup, an adjustable\/removable mid-level spreader, and dual spiked feet with removable rubber pads. The tripod system extends to a maximum height of 63 inch, while getting as low as 31.7 inch. A carry case and shoulder strap are included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupports up to 8.8 lb\u003c\/li\u003e\n\u003cli\u003eSix-step (0 to 5) counterbalance\u003c\/li\u003e\n\u003cli\u003eRemovable tie-down stud to convert to flat base head\u003c\/li\u003e\n\u003cli\u003eIndependent four-step (0 to 3) pan and tilt drag\u003c\/li\u003e\n\u003cli\u003e-75° to +90° Tilt range\u003c\/li\u003e\n\u003cli\u003eManfrotto 501\/504PL compatible sliding plate\u003c\/li\u003e\n\u003cli\u003eTwo 3\/8 inch-16 accessory threads for mounting accessories, such as a monitor or recorder\u003c\/li\u003e\n\u003cli\u003eBubble level\u003c\/li\u003e\n\u003cli\u003eThe legs feature dual spiked feet that provide solid purchase in soft surfaces when the legs are spread wide or extended to full height.\u003c\/li\u003e\n\u003cli\u003eThe removable mid-level spreader allows you to work on uneven terrain, such as stairs or rocks, while preventing the legs from flying apart. When using the mid-level spreader, you can use the included rubber feet to protect delicate surfaces from the tripod's foot spikes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":44578888876309,"sku":"BV4PRO","price":899.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1460720105_1246006.jpg?v=1680227063"},{"product_id":"benro-tortoise-columnless-carbon-fiber-zero-series-tripod-with-gx25-ball-head","title":"Benro Tortoise Columnless Carbon Fiber Zero Series Tripod with GX25 Ball Head","description":"\u003cdiv class=\"page-title-wrapper product\"\u003e\r\n\u003ch2 class=\"page-title\"\u003e\u003cstrong\u003e\u003cspan class=\"base\" style=\"font-size: 16px;\" data-ui-id=\"page-title-wrapper\"\u003eBenro Tortoise Columnless Carbon Fiber Zero Series Tripod with GX25 Ball Head\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eThe small yet mighty \u003cstrong\u003eTortoise Columnless Carbon Fiber Zero Series Tripod\u003c\/strong\u003e with \u003cstrong\u003eGX25 Ball Head \u003c\/strong\u003efrom \u003cstrong\u003eBenro \u003c\/strong\u003eis a compact, lightweight travel tripod with a high load capacity and remarkable stability. The centre column-free design makes it nimble and lightweight for travel and reduces the potential for shake common to high centre column positioning. This is especially significant when shooting video content. The legs offer independent spread and three locking positions and incorporate automatic leg angle adjustment for fast and sure setup. The aluminum leg spider features a 1\/4 inch-20 accessory mounts for extension arms, monitors, lights, and more. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eGX25 Dual Panoramic Ball Head\u003c\/strong\u003e\u003cbr\u003eThe GX25 ball head is a low-profile head featuring dual panoramic mode, which allows panning head from its base and also from the quick release platform. The controls are simple, with ball friction adjustment built into the main lock knob, plus an independent pan lock. It includes a PU56 quick release plate and features a quick release plate safety lock.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAuto-Hold Leg Trigger\u003c\/strong\u003e\u003cbr\u003eChange leg angles effortlessly with the push of a button, then press the pre-locking button when the desired angle is reached.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLightweight Aluminium Leg Spider Design\u003c\/strong\u003e\u003cbr\u003eThe streamlined milled-aluminum leg spider allows the legs to be reversed for folding or inverted shooting. It includes three 1\/4 inch-20 threaded accessory sockets, allowing lights, microphones, monitors, accessory arms, and more to be attached.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1\/4 inch and 3\/8 inch self-adaptive tripod head installation screw thread, compatible with most tripod heads, ball heads, fluid heads, and gimbals.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eErgonomic Twist-Locks\u003c\/strong\u003e\u003cbr\u003eHighly grippable twist lock collars make opening and closing legs fast and sure.\u003c\/p\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":44580906172693,"sku":"TTOR03CGX25","price":449.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/19_4_9.jpg?v=1680276127"},{"product_id":"benro-tortoise-columnless-carbon-fiber-one-series-tripod-with-gx25-ball-head","title":"Benro Tortoise Columnless Carbon Fiber One Series Tripod with GX25 Ball Head","description":"\u003cdiv class=\"page-title-wrapper product\"\u003e\r\n\u003ch2 class=\"page-title\"\u003e\u003cstrong\u003e\u003cspan class=\"base\" style=\"font-size: 16px;\" data-ui-id=\"page-title-wrapper\"\u003eBenro Tortoise Columnless Carbon Fiber One Series Tripod with GX25 Ball Head\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eThe small yet mighty \u003cstrong\u003eTortoise Columnless Carbon Fiber One Series Tripod\u003c\/strong\u003e with \u003cstrong\u003eGX25 Ball Head\u003c\/strong\u003e from \u003cstrong\u003eBenro \u003c\/strong\u003eis a compact, lightweight travel tripod with a high load capacity and remarkable stability. The centre column-free design makes it nimble and lightweight for travel and reduces the potential for shake common to high centre column positioning. This is especially significant when shooting video content. The legs offer independent spread and three locking positions and incorporate automatic leg angle adjustment for fast and sure setup. The aluminum leg spider features a 1\/4 inch-20 accessory mounts for extension arms, monitors, lights, and more. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eGX25 Dual Panoramic Ball Head\u003c\/strong\u003e\u003cbr\u003eThe GX25 ball head is a low-profile head featuring dual panoramic mode, which allows panning head from its base and also from the quick release platform. The controls are simple, with ball friction adjustment built into the main lock knob, plus an independent pan lock. It includes a PU56 quick release plate and features a quick release plate safety lock.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAuto-Hold Leg Trigger\u003c\/strong\u003e\u003cbr\u003eChange leg angles effortlessly with the push of a button, then press the pre-locking button when the desired angle is reached.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLightweight Aluminium Leg Spider Design\u003c\/strong\u003e\u003cbr\u003eThe streamlined milled-aluminum leg spider allows the legs to be reversed for folding or inverted shooting. It includes three 1\/4\"-20 threaded accessory sockets, allowing lights, microphones, monitors, accessory arms, and more to be attached.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1\/4 inch and 3\/8 inch self-adaptive tripod head installation screw thread, compatible with most tripod heads, ball heads, fluid heads, and gimbals.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eErgonomic Twist-Locks\u003c\/strong\u003e\u003cbr\u003eHighly grippable twist lock collars make opening and closing legs fast and sure.\u003c\/p\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":44580916527381,"sku":"TTOR14CGX25","price":549.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/18_5_12.jpg?v=1680276339"},{"product_id":"benro-tortoise-columnless-carbon-fiber-three-series-tripod-with-gx35-ball-head","title":"Benro Tortoise 34C with GX35 Ball Head, Carbon Fibre, 5 Section, Photo Tripod Kit","description":"\u003cp\u003eThe small yet mighty \u003cstrong\u003eTortoise Columnless Carbon Fibre Three Series Tripod\u003c\/strong\u003e with \u003cstrong\u003eGX35 Ball Head\u003c\/strong\u003e from \u003cstrong\u003eBenro \u003c\/strong\u003eis a compact, lightweight travel tripod with a high load capacity and remarkable stability. The centre column-free design makes it nimble and lightweight for travel and reduces the potential for shake common to high centre column positioning. This is especially significant when shooting video content. The legs offer independent spread and three locking positions and incorporate automatic leg angle adjustment for fast and sure setup. The aluminum leg spider features a 1\/4 inch-20 accessory mounts for extension arms, monitors, lights, and more. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eGX35 Dual Panoramic Ball Head\u003c\/strong\u003e\u003cbr\u003eThe GX35 ball head is a low-profile head featuring dual panoramic mode, which allows panning head from its base and also from the quick release platform. The controls are simple, with ball friction adjustment built into the main lock knob, plus an independent pan lock. It includes a PU56 quick release plate and features a quick release plate safety lock.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAuto-Hold Leg Trigger\u003c\/strong\u003e\u003cbr\u003eChange leg angles effortlessly with the push of a button, then press the pre-locking button when the desired angle is reached.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLightweight Aluminium Leg Spider Design\u003c\/strong\u003e\u003cbr\u003eThe streamlined milled-aluminum leg spider allows the legs to be reversed for folding or inverted shooting. It includes three 1\/4 inch-20 threaded accessory sockets, allowing lights, microphones, monitors, accessory arms, and more to be attached.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1\/4 inch and 3\/8 inch self-adaptive tripod head installation screw thread, compatible with most tripod heads, ball heads, fluid heads, and gimbals.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eErgonomic Twist-Locks\u003c\/strong\u003e\u003cbr\u003eHighly grippable twist lock collars make opening and closing legs fast and sure.\u003c\/p\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":44580934287637,"sku":"TTOR34CGX35","price":669.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/27_1_3.jpg?v=1680276515"},{"product_id":"benro-gx30-two-series-arca-type-low-profile-aluminum-ball-head-with-pu56-plate","title":"Benro GX30 Low Profile Ball Head","description":"\u003cp\u003eA perfect companion for your next shoot, the GX30 Two Series Arca-Type Low Profile Aluminum Ball Head from Benro delivers uncompromising strength, functionality, and value. This head features an intuitive design with a dual panoramic pan head for precise movements, and rounded operation knobs enable you to quickly and securely switch between landscape and portrait orientations. 360° rotation beneath the quick release plate and 360° rotation beneath the ball head provide accurate positioning to get panoramic photos with ease, and reference scales allow your settings to be easily replicated. The included bubble level enables you to accurately level out your shot, and the head features a safety lock with pull and twist functionality for the quick release plate.\u003c\/p\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":44582078808341,"sku":"GX30","price":249.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/1595436354_1576684.jpg?v=1767311928"},{"product_id":"benro-universal-l-bracket","title":"Benro Universal L Bracket","description":"\u003cp\u003eBenro BLB1 (BL-B1) Universal Camera L-Bracket. The Benro Universal L Bracket is designed to help improve the stability of your camera when shooting in Portrait mode. If using a ball or 3-way head, when you move your camera to the portrait position you reposition the camera so that it is no longer supported on the tripod, it is now ‘hanging’ off the tripod head.\u003c\/p\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":44582079594773,"sku":"BLB1","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/benro-blb1-universal-camera-l-bracket.jpg?v=1680288291"},{"product_id":"benro-t980-photo-and-video-hybrid-tripod-with-fluid-head-11-lb-payload","title":"Benro T980 Photo and Video Hybrid Tripod with Fluid Head (11 lb Payload)","description":"\u003cp\u003eQuick to set up and adjust, the Benro T980 Photo and Video Hybrid Tripod with Fluid Head is an ultralightweight tripod you can easily carry with you. It supports up to 11 lb while weighing less than 4.5 lb, so it won't tire you out. It features a quick release plate for rapidly mounting and unmounting the camera from the tripod, which frees you to carry the camera separately from the pod when trying to reach otherwise inaccessible places, then quickly set up and shoot while the moment is ripe.\u003c\/p\u003e\r\n\u003cp\u003eThe tripod is suitable not only for mirrorless and DSLR cameras but also for smartphones (optional smartphone mount required). The head allows you to quickly change the plate from horizontal to vertical to change the orientation of your shot without requiring additional mounting plates. The tripod has three leg sections with fast and secure flip locks, and it reaches a maximum height of 61.8\" when the geared center column is fully extended. An integrated bubble level on the legs helps you quickly level the tripod, while an included bag helps you store and transport your tripod when not in use.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAdjustable pan bar\u003c\/li\u003e\r\n\u003cli\u003eQuick release camera plate with a D-ring 1\/4\"-20 mounting screw\u003c\/li\u003e\r\n\u003cli\u003eAluminum construction\u003c\/li\u003e\r\n\u003cli\u003e9.9 lb payload\u003c\/li\u003e\r\n\u003cli\u003eSmooth damping pan and tilt movements\u003c\/li\u003e\r\n\u003cli\u003eIndexed pan markings for repeatable pans\u003c\/li\u003e\r\n\u003cli\u003eFour leg sections\u003c\/li\u003e\r\n\u003cli\u003e66.6\" maximum height with the geared center column extended\u003c\/li\u003e\r\n\u003cli\u003eFixed rubber feet; weight hook\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":44584258339093,"sku":"T980","price":129.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/t980_5_1000.jpg?v=1680311260"},{"product_id":"benro-tortoise-24c-carbon-fibre-4-sec-tripod-with-gx30-ball-head-kit","title":"Benro Tortoise 24C Carbon Fibre 4 Sec Tripod with GX30 Ball Head Kit","description":"\u003cdiv class=\"page-title-wrapper product\"\u003e\r\n\u003ch2 class=\"page-title\"\u003e\u003cstrong\u003e\u003cspan class=\"base\" style=\"font-size: 16px;\" data-ui-id=\"page-title-wrapper\"\u003eBenro Tortoise 24C Carbon Fibre 4 Sec Tripod with GX30 Ball Head Kit\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eThe small yet mighty Benro Tortoise Series Tripod has been developed for those looking for a compact, lightweight travel tripod, that punches above its weight when it comes to weight capacity and stability. Without the addition of a center column, the diameter of a folded Tortoise is just 3.1in (8cm) making it extremely portable and easy to stow in a backpack.\u003c\/p\u003e\r\n\u003cp\u003eThere are two types of \u003ca title=\"Bentro Tripods\" href=\"https:\/\/www.cameraelectronic.com.au\/benro-tortoise-24c-carbon-fibre-4-sec-tripod-with-gx35-ball-head-kit\"\u003eBenro Tortoise Series tripods\u003c\/a\u003e available, one for photo that features a flat platform to mount the head and another for video that features a ball levelling device to mount the head on.\u003c\/p\u003e\r\n\u003cp\u003eThere are five models for photo, all in carbon fiber with weight capacities up to 44lb (20kg) and weighing from just 1.27lb (0.58kg), meaning there is sure to be a model to suit most photographer's requirements. There are two video models available, both made from lightweight carbon fiber and able to support up to 44lb (20kg).\u003c\/p\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":44584258601237,"sku":"TTOR24CGX30","price":599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/products\/ttor24cgx30_2_1.jpg?v=1767268803"},{"product_id":"benro-cyanbird-carbon-fibre-aluminium-4sec-tripod-with-n100p-ball-head","title":"Benro Cyanbird Carbon Fibre \u0026 Aluminium Tripod + N100P Ball Head","description":"\u003cdiv class=\"group w-full text-gray-800 dark:text-gray-100 border-b border-black\/10 dark:border-gray-900\/50 bg-gray-50 dark:bg-[#444654]\"\u003e\n\u003cdiv class=\"flex p-4 gap-4 text-base md:gap-6 md:max-w-2xl lg:max-w-[38rem] xl:max-w-3xl md:py-6 lg:px-0 m-auto\"\u003e\n\u003cdiv class=\"relative flex w-[calc(100%-50px)] flex-col gap-1 md:gap-3 lg:w-[calc(100%-115px)]\"\u003e\n\u003cdiv class=\"flex flex-grow flex-col gap-3\"\u003e\n\u003cdiv class=\"min-h-[20px] flex items-start overflow-x-auto whitespace-pre-wrap break-words flex-col gap-4\"\u003e\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003ch2\u003eBenro Cyanbird Carbon Fibre \/ Aluminium Tripod Kit with N00P Ball Head\u003c\/h2\u003e\n\u003cp\u003eBoasting a sleek ocean blue design and carbon fibre and aluminium construction, the Cyanbird can reach heights over 155cm while being able to fold down to just 43.3cm, making it easy to store in your backpack or camera bag. Robust aluminium flip locks allow for a fast and fumble-free setup every time and the weight hook at the end of the centre column adds stability. Plus, the upper section of the center-column contains three ¼-20 accessory mounts for added flexibility. The kit includes the N00P photo head, a double action ball head with lock knob for easy operation and a ball lock and pan lock for precise positioning. The head also features a 90° notch for vertical shooting and a camera plate with 3-way screw for quick attachment. And for even more flexibility, the included padded carry case features an open-faced design when unfolded, giving you easy access to your tripod and other gear. Don't settle for less than the best. Upgrade to the Benro Cyanbird Tripod TCBH15N00P base model today and take your photography to new heights with this must-have photography accessory.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCyanbird can reach heights over 155cm while being able to fold down to just 43.4cm\u003c\/li\u003e\n\u003cli\u003eThe kit includes the N00P photo head, a double action ball head with lock knob for easy operation and a ball lock and pan lock for precise positioning\u003c\/li\u003e\n\u003cli\u003eThe included padded carry case features an open-faced design when unfolded, giving you easy access to your tripod and other gear\u003c\/li\u003e\n\u003cli\u003eThe Cyanbird is travel-friendly tripod that can go wherever your creativity takes you\u003c\/li\u003e\n\u003cli\u003eRobust aluminium flip locks allow for a fast and fumble-free setup every time and the weight hook at the end of the centre column adds stability\u003c\/li\u003e\n\u003cli\u003eThe tripod is compact and easy to carry\u003c\/li\u003e\n\u003cli\u003eThe tripod is lightweight\u003c\/li\u003e\n\u003cli\u003eThe flip lock is aluminium with high strength.\u003c\/li\u003e\n\u003cli\u003eTwo section centre column\u003c\/li\u003e\n\u003cli\u003eHybrid Carbon Fibre \u0026amp; Aluminium construction\u003c\/li\u003e\n\u003cli\u003eHead handle angle can be adjusted.\u003c\/li\u003e\n\u003cli\u003eAccessory screws on centre column\u003c\/li\u003e\n\u003cli\u003eNew ocean blue design\u003c\/li\u003e\n\u003cli\u003eMaximum Height : 155cm\u003c\/li\u003e\n\u003cli\u003eMinimum Height : 17.7cm\u003c\/li\u003e\n\u003cli\u003eFolded Height : 46cm\u003c\/li\u003e\n\u003cli\u003eIndependent Leg Spread : Yes\u003c\/li\u003e\n\u003cli\u003eSupport Angle : 22° \/ 55° \/ 80°\u003c\/li\u003e\n\u003cli\u003eWeight : 1.05kg\u003c\/li\u003e\n\u003cli\u003ePayload : 4kg\u003c\/li\u003e\n\u003cli\u003eHead Type : Ball Head\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type : Flip\u003c\/li\u003e\n\u003cli\u003eLeg Sections : 5\u003c\/li\u003e\n\u003cli\u003eFeet : Rubber\u003c\/li\u003e\n\u003cli\u003eQR Plate : PU40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":45175554572565,"sku":"TCBH15N00P","price":599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1684767120_1767829.jpg?v=1688531623"},{"product_id":"benro-qrb95-quick-rotating-bracket","title":"Benro QRB95 Quick Rotating Bracket","description":"This Quick Rotating Bracket from Benro makes it simple to alternate the orientation of your camera between landscape and portrait without having to disrupt your setup. Simply unlock the lever and position your camera to the desired orientation along the 90° range the bracket offers, all without disturbing the alignment of its center point. The plate also offers mounting via the double-sided arca-type and 501PL plate for wider compatibility. All you have to do is unscrew and reattach the reversible plate to the desired side of use that best fits your equipment, or you can attach the included single sided arca-type plate to keep things simple. A cold-shoe mount on the top of the bracket allows you to utilize additional accessories like lights or microphones, and the included allen key attaches magnetically to the bracket so it is always within reach for convenient use when needed.","brand":"Benro","offers":[{"title":"Default Title","offer_id":48164724998421,"sku":"QBR95","price":189.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1691664326_1780984.jpg?v=1712800567"},{"product_id":"benro-aero-2-pro-carbon-fiber-travel-video-tripod-with-twist-locks","title":"Benro Aero 2 PRO Carbon Fiber Travel Video Tripod with Twist Locks","description":"\u003cp\u003e\u003cstrong\u003eConvertible to Monopod\u003c\/strong\u003e\u003cbr\u003eThe Aero 2 PRO can also be converted into a monopod. One of the tripod legs is removable and can be combined with the center column to turn the system into a monopod, which can be useful in many mobile applications. To set it up this way, simply remove the tripod head along with the center column, unscrew one of the tripod legs, and attach it to the center column.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReversible Folding Design\u003c\/strong\u003e\u003cbr\u003eThe Aero 2 PRO has a reversible design wherein the tripod legs fold back when you're ready to pack the tripod away. When the tripod is reversed this way, the folded length becomes only 21\".\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick Release Camera Plate\u003c\/strong\u003e\u003cbr\u003eAn included camera plate features a standard 1\/4\"-20 mounting screw for attaching your camera.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpiked and Rubber Feet\u003c\/strong\u003e\u003cbr\u003eThe tripod feet have rubber footpads on them, but these can be removed to reveal native spiked feet. Between these two foot types, you can securely use the tripod on smooth surfaces as well as soft ground.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLeft\/Right Pan Bar Mounts\u003c\/strong\u003e\u003cbr\u003eA pan bar is also included and can be attached to either the left- or right-side rosette mount for your choice of left- or right-handed operation.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":48348650144021,"sku":"C1683TS2PRO","price":769.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1613042447_1622345.jpg?v=1757149116"},{"product_id":"benro-bat-one-series-aluminum-travel-tripod-with-vx20-ball-head-65-2","title":"Benro Bat One Series Aluminum Travel Tripod with VX20 Ball Head (65.2\")","description":"\u003cp\u003eThe Bat One Series Aluminum Travel Tripod with VX20 Ball Head from Benro is a compact, lightweight tripod with a high load capacity and remarkable stability. The legs offer independent positioning with 5 available preset leg angles, allowing the legs to be placed in more positions that traditional tripods are capable of. The legs are also reversible for inverted shooting and compact storage and travel. The auto-hold leg position trigger makes adjusting the tripod leg angles quick and easy. The aluminum leg spider features three 1\/4\"-20 accessory mounts for attaching accessory extension arms, monitors, lights, and more. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX20 Dual Panoramic Ball Head\u003c\/strong\u003e\u003cbr\u003eThe VX20 ball head features dual panoramic mode, which allows panning head from its base and also from the quick release platform. The controls are simple with ball friction adjustment built into the main lock knob, plus an independent pan lock. It includes a PU50X quick release plate and features a quick release plate safety lock.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConverts to Monopod\u003c\/strong\u003e\u003cbr\u003eThe center column and one removable leg combine to form a full-featured 66.34\" tall monopod.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAuto-Hold Leg Trigger\u003c\/strong\u003e\u003cbr\u003eChange leg angles effortlessly with the push of a button, then press the pre-locking button when the desired angle is reached.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLightweight Aluminum Leg Spider Design\u003c\/strong\u003e\u003cbr\u003eThe streamlined milled-aluminum leg spider allows the legs to be reversed for folding or inverted shooting. It includes three 1\/4\"-20 threaded accessory sockets, allowing lights, microphones, monitors, accessory arms, and more to be attached.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Center Column\u003c\/strong\u003e\u003cbr\u003eThe two-section center column locks in place with an ergonomically enhanced twist lock collar and features a ballast hook.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eErgonomic Twist-Locks\u003c\/strong\u003e\u003cbr\u003eHighly grippable twist lock collars make opening and closing legs fast and sure.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":48417393672469,"sku":"FBAT15AVX20","price":429.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1595418356_1576676.jpg?v=1720672757"},{"product_id":"benro-bat-one-series-carbon-fiber-travel-tripod-with-vx20-ball-head-65-2","title":"Benro Bat One Series Carbon Fiber Travel Tripod with VX20 Ball Head (65.2\")","description":"\u003cp\u003eThe Bat One Series Carbon Fiber Travel Tripod with VX20 Ball Head from Benro is a compact, lightweight tripod with a high load capacity and remarkable stability. The legs offer independent positioning with 5 available preset leg angles, allowing the legs to be placed in more positions that traditional tripods are capable of. The legs are also reversible for inverted shooting and compact storage and travel. The auto-hold leg position trigger makes adjusting the tripod leg angles quick and easy. The aluminum leg spider features three 1\/4\"-20 accessory mounts for attaching accessory extension arms, monitors, lights, and more. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX20 Dual Panoramic Ball Head\u003c\/strong\u003e\u003cbr\u003eThe VX20 ball head features dual panoramic mode, which allows panning head from its base and also from the quick release platform. The controls are simple with ball friction adjustment built into the main lock knob, plus an independent pan lock. It includes a PU50X quick release plate and features a quick release plate safety lock.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConverts to Monopod\u003c\/strong\u003e\u003cbr\u003eThe center column and one removable leg combine to form a full-featured 66.54\" tall monopod.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAuto-Hold Leg Trigger\u003c\/strong\u003e\u003cbr\u003eChange leg angles effortlessly with the push of a button, then press the pre-locking button when the desired angle is reached.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLightweight Aluminum Leg Spider Design\u003c\/strong\u003e\u003cbr\u003eThe streamlined milled-aluminum leg spider allows the legs to be reversed for folding or inverted shooting. It includes three 1\/4\"-20 threaded accessory sockets, allowing lights, microphones, monitors, accessory arms, and more to be attached.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Center Column\u003c\/strong\u003e\u003cbr\u003eThe two-section center column locks in place with an ergonomically enhanced twist lock collar and features a ballast hook.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eErgonomic Twist-Locks\u003c\/strong\u003e\u003cbr\u003eHighly grippable twist lock collars make opening and closing legs fast and sure.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":48417395441941,"sku":"FBAT15CVX20","price":529.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1595419514_1576677.jpg?v=1720672979"},{"product_id":"benro-cyanbird-aluminum-tripod-with-fs20pro-2-in-1-pan-head","title":"Benro CyanBird Aluminum Tripod + FS20PRO Hybrid Head","description":"\u003cp\u003eThe CyanBird Aluminum Tripod with FS20PRO 2-in-1 Pan Head from Benro is a travel-friendly tripod that can go wherever your creativity takes you. Boasting a sleek ocean blue design, this lightweight and versatile tripod is perfect for photo, video, and content creation. It has a load capacity of 9.92 lb and extends to a height of 61.6\", yet easily folds down to just 17.13\", making it a great fit for any backpack or camera bag. The lightweight aluminum legs feature a flatter shape than traditional round legs to provide rigidity while reducing size.\u003c\/p\u003e\n\u003cp\u003eWith robust aluminum flip locks, a two-section center column and three-angle adjustable stops, the Benro CyanBird can be set up anywhere in a flash. The two-section center column splits to provide low camera angles or macro imaging. The center top section of the center column features three 1\/4\"-20 threaded mounts to attach optional accessories light lights, microphones, or monitors.\u003c\/p\u003e\n\u003cp\u003eThe set includes the FS20PRO 2-way pan\/tilt hybrid tripod head that is ideally suited for both photo and video. It features a ball head design with an independent pan lock and a folding pan handle. It includes an Arca-type quick release plate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlat leg design for rigidity and compactness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRobust aluminum flip locks allow a fast and easy setup\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo-section center column splits for low camera angles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCenter column includes three 1\/4\"-20 accessory threads\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCenter column weight hook for added stability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOpen-face padded carrying case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":48417398817045,"sku":"TCBA15FS20PRO","price":699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1684502715_1767827.jpg?v=1720673279"},{"product_id":"benro-fbat24cvx25-bat-carbon-fiber-tripod-kit-with-vx25-ball-head","title":"Benro FBAT24CVX25 Bat Carbon Fiber Tripod Kit with VX25 Ball Head","description":"\u003cp\u003eSupport up to 35 lb with the FBAT24CVX25 Bat Carbon Fiber Tripod Kit with VX25 Ball Head from Benro. Employing twist locks, the four-section tripod rises to a height of 70\" (5.8'), has a reversible column that lets you literally shoot at ground level, and uses a reverse-folding leg design that allows it to fold down to just 17.3\". Its light weight of just of just 3.9 lb makes it the ideal travel tripod, and the included VX25 ball head has separate pan and ball locks and an Arca-type clamp with a quick release plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBenefits\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMultifunctional legs that can be locked in five corners\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCentral column can be turned fast without unscrewing it\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVery slim spider for extra weight savings\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThree connection points for accessories with 1\/4\"-20 thread\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh load capacity due to innovative carbon production method\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eErgonomic swivel joints with more grip\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRubber feet with improved grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":48427765563669,"sku":"FBAT24CVX25","price":589.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1595423143_1576678.jpg?v=1721204653"},{"product_id":"benro-polaris-astro-edition-3-axis-smart-tripod-head","title":"Benro Polaris Astro 3-Axis Smart Tripod Head","description":"\u003cp\u003eThe Polaris Astro Edition 3-Axis Smart Tripod Head from Benro is the world's first electric tripod head with an integrated camera interface controller. It allows adjusting the composition of a photo and enables users to program the head to capture a series of photographs, easily track and take long exposures of stars, or create high resolution motion timelapses. The wireless Bluetooth connection provide remote function as well as preview, review, and download files via a dedicated and free to download App. It has a battery life of over 24 hours and the ability to charge during use.\u003c\/p\u003e\n\u003cp\u003eFeatured built-in modes include as People Remover, Panorama, Motion Timelapse, Dynamic Exposure Timelapse, Focus Stacking, and Star Tracking. These modes work with a wide variety of cameras using the included camera control cables.\u003c\/p\u003e\n\u003cp\u003eThe Polaris Astro has a redundant onboard and swappable microSD card slot that ensures no images are lost from a shoot, and also enables rapid editing. Polaris can render Path lapses, Panoramas, etc., and quickly display previously shot image on a smartphone. The Polaris is manufactured from aluminum alloy and stainless steel and is designed to work in the harshest of environments. It is rated at an IPX6 water-resistant performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003ePeople Remover\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePanorama\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotion Timelapse\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDynamic Exposure Timelapse\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFocus Stacking\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStar Tracking\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMedia Slots\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSD\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSim Card\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":48469210759445,"sku":"BR209","price":2399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1664614033_1725588.jpg?v=1723170926"},{"product_id":"benro-c3883t-aero-carbon-fibre-video-tripod-kit-with-s6pro-head","title":"Benro C3883T AERO Carbon Fibre Video Tripod Kit with S6PRO Head","description":"\u003cp\u003eThe C3883T is a professional video tripod with a heavy-duty, ergonomic design. It is perfect for shooting in studio and on location. It features a durable, carbon fiber construction with rubber feet for stability and spiked feet for extra grip. The tripod is also equipped with twist leg locks to provide quick and easy adjustments. \u003c\/p\u003e\n\u003cp\u003eThe S6Pro is a heavy duty, fully adjustable, high-quality tripod with a center column that can be switched from a tripod to a monopod. It comes with a safety plate and rubber feet to prevent slipping and scratching. The S6Pro is an ideal choice for photographers and videographers who want the versatility of a heavy duty tripod with the option of shooting with a monopod.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features in Detail\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReverse folding tripod legs\u003c\/strong\u003e\u003cbr\u003eThe Aero 6 PRO Carbon Fiber is a travel video tripod that can support up to 13.2 lb (6 kg). The reverse folding tripod legs allow the tripod to be compact for travel and the flat base S6 PRO video head is removable. The center column includes a leveling adapter so that the head can be leveled independently without having to adjust the tripod legs. The center column converts to a short column for low angle shots. In addition to being a tripod, one of the legs can be unthreaded and joined with the center column to become a fully functioning video monopod.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eFor small video cameras and mirrorless rigs and accessories\u003c\/strong\u003e\u003cbr\u003eIdeal for a small video cameras and mirrorless rigs with accessories, the S6 PRO video head supports up to 13.2 lb.\/6kg. Equipped with a 65mm flat base with a 3\/8\"-16 thread, the S6 PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods. Other features include: pan \u0026amp; tilt lock, continuous pan \u0026amp; tilt drag, 6-step counterbalance (0-5), illuminated bubble level and two 1\/4\"-20 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so. Tilt range for the S6 PRO is +90o\/-75o. The forward 90 degree tilt helps with table top setups. The S6 PRO also features metal ratchet style knobs and an improved CNC machined aluminum sliding camera plate.\u003c\/p\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":48494557102357,"sku":"C3883TS6PRO","price":1149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/benro_c3883ts6pro_1_1.jpg?v=1724378003"},{"product_id":"benro-gd3wh-3-way-geared-head","title":"Benro GD3WH 3-Way Geared Head","description":"\u003cp\u003eAccurately position your camera with the 4.3\" tall GD3WH 3-Way Geared Head from Benro, which has three independent geared movements that move with precision by turning the knob in slow increments. To quickly position a camera without the gears, simply turn the inner wheel counter-clockwise, which releases the clutch, to move the camera into the desired angle.\u003c\/p\u003e\n\u003cp\u003eThe 1.6 lb Arca-type compatible head is constructed from a durable magnesium alloy, and its carbon steel and bronze gears provide smooth operation. With the head's load capacity of 13.2 lb, it can hold a mirrorless to medium format camera with ease, and the three bubble levels ensure accurate leveling of the camera in any axis.\u003c\/p\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":48537277530389,"sku":"GD3WH","price":399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1577722729_IMG_1296583.jpg?v=1726450262"},{"product_id":"benro-3xslite-bluetooth-smartphone-gimbal","title":"Benro 3XSLITE Bluetooth Smartphone Gimbal","description":"\u003cdiv class=\"productDescription_UbV5SNP5Eo\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003e\n\u003cp\u003eThe lightweight\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e3XS Lite 3-Axis Smartphone Handheld Gimbal Stabilizer\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efrom\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eBenro\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ehas been designed to provide stability for mobile phone video capture. Using the customizable buttons or with the free, downloadable control app for Android or iOS, you can control the gimbal settings, roll following, face tracking, or time-lapse, and you can change the phone orientation at the touch of a button. The phone holder supports phones up to 8.8 oz and 3.5\" wide.\u003cbr\u003e\u003cbr\u003eA trigger button on the handle allows you to quickly change to follow or locked-down mode. The Universal Follow mode adjusts to your movements as you aim the phone camera at your subject, and locked-down mode keeps your camera in a fixed position. The directional joystick allows you to manually adjust the three axes to position your phone for just the right angle. When using the app, you can set up dynamic panoramas or time-lapses for a variety of creative shots. A 3.5mm microphone port allows you to plug in an external mic to record stereo audio.\u003cbr\u003e\u003cbr\u003ePowered by a rechargeable 2000mAh lithium-ion battery, the 3XS Lite features a maximum runtime of up to 24 hours. The gimbal includes a mini tripod and a charging cable. A single 1\/4\"-20 female thread on the handgrip bottom can be used to mount the stabilizer onto the included tripod or other support, or to attach a compatible accessory.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"featureHeader_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"text_TAw0W35QK_ comfy_TAw0W35QK_ sizeTitle2_TAw0W35QK_ weightNormal_TAw0W35QK_ primary_i3MsQsqoe0\"\u003eKey Features\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003e\n\u003cul\u003e\n\u003cli\u003eSupports smartphones weighing up to 8.8 oz, and up to 3.5\" in height\u003c\/li\u003e\n\u003cli\u003eUse with the free, downloadable app to control select iOS\/Android phone functions\u003c\/li\u003e\n\u003cli\u003eUniversal follow and lock modes\u003c\/li\u003e\n\u003cli\u003eMultiple time-lapse and follow-mode choices\u003c\/li\u003e\n\u003cli\u003e320° of pan, 330° of tilt, and 330° of roll\u003c\/li\u003e\n\u003cli\u003eUp to 24-hour runtime\u003c\/li\u003e\n\u003cli\u003e3.5mm microphone jack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49103172403477,"sku":"3XSLITE","price":179.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/71ITaObkHcL._AC_SL1500.jpg?v=1755096485"},{"product_id":"benro-fs20pro-hybird-tripod-head-ocean-blue","title":"Benro Cyanbird FS20PRO Hybird Tripod Head - Ocean Blue","description":"\u003cp\u003e\u003cspan\u003eThe\u003cstrong\u003e Benro FS20PRO hybrid compact tripod head\u003c\/strong\u003e is perfect for both photo and video. With dual panning, separate ball lock, and tilt lock, you can level your shot and get perfectly smooth movements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe quick release plate with a 3-way screw allows for quick camera attachment and release, and the hidden allen key makes for quick adjustments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact and mini size for travelling\u003c\/li\u003e\n\u003cli\u003eBoasts dual panning, separate ball lock, and tilt lock - making it easy to level your shot and get perfectly smooth movements.\u003c\/li\u003e\n\u003cli\u003eThe quick release plate haas a 3-way screw that allow for quick camera attachment and release.\u003c\/li\u003e\n\u003cli\u003eA hidden allen key allows for rapid tightening and adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"classyunicodedone\"\u003eSPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: FS20PROC\u003c\/li\u003e\n\u003cli\u003eBack Tilt Range:90\u003c\/li\u003e\n\u003cli\u003eBall Diameter (mm):20\u003c\/li\u003e\n\u003cli\u003eBase Mount Diameter (mm):35\u003c\/li\u003e\n\u003cli\u003eBase Mount Thread:3\/8\u003c\/li\u003e\n\u003cli\u003eBubble Level:Y\u003c\/li\u003e\n\u003cli\u003eCounterbalance:Fixed\u003c\/li\u003e\n\u003cli\u003eForward Tilt Range:90\u003c\/li\u003e\n\u003cli\u003eHead Mount:3\/8\u003c\/li\u003e\n\u003cli\u003eHead Type:Photo Video head\u003c\/li\u003e\n\u003cli\u003eMaximum Payload Capacity (kg):4.5\u003c\/li\u003e\n\u003cli\u003ePan Drag:Fixed\u003c\/li\u003e\n\u003cli\u003ePan Lock:Y\u003c\/li\u003e\n\u003cli\u003ePanning Range:360\u003c\/li\u003e\n\u003cli\u003eDimensions (LxWxH): 7.8 x 5 x 8.2 cm\u003c\/li\u003e\n\u003cli\u003eProduct Weight (kg):0.31\u003c\/li\u003e\n\u003cli\u003eQR Plate - Length (cm):5\u003c\/li\u003e\n\u003cli\u003eQR Plate - Width (cm):3.8\u003c\/li\u003e\n\u003cli\u003eQuick Release Camera Thread Size:1\/4\u003c\/li\u003e\n\u003cli\u003eQuick Release Type:Arca\u003c\/li\u003e\n\u003cli\u003eSeparate Panning Lock:Y\u003c\/li\u003e\n\u003cli\u003eTilt Drag:Fixed\u003c\/li\u003e\n\u003cli\u003eTilt Lock:Y\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49103172337941,"sku":"FS20PRO","price":219.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/uctjgdkevrnyktlkxi5t__98246.1695877618__91953.jpg?v=1755096587"},{"product_id":"benro-polaris-time-lapse-2-axis-head","title":"Benro Polaris Time Lapse 2-Axis Head","description":"\u003ch2\u003eBenro Polaris Time Lapse 2-Axis Head\u003c\/h2\u003e\n\u003cp\u003eThe Polaris is the world's first electric tripod head with an integrated camera interface controller. Polaris not only allows you to adjust the composition of a photo, but it enables users to program the intelligent head to capture a series of photographs, take panoramas, or create high-resolution motion timelapses. Polaris also offers a wireless connection so you can do all the above remotely as well as preview, review, and download files via a dedicated app from nearly anywhere.  \u003c\/p\u003e\n\u003cp\u003eThe Polaris Timelapse Edition features built in modes such as People Remover, Panorama, Motion Timelapse, Dynamic Exposure Timelapse, Focus Stacking and with the optional Astro add-on module - Star Tracking. With a battery life of over 24 hours and the ability to charge during use – Polaris can shoot all day and then keep going. These modes work with a wide variety of cameras. The compatibility list can be found here.  \u003c\/p\u003e\n\u003cp\u003ePolaris also has a redundant onboard and swappable micro SD card slot that ensures no images are lost from a shoot. It also enables Polaris to do some rapid editing for you while in the field. Polaris can render Pathlapses, Panoramas, etc and quickly display previously shot image on your phone. \u003c\/p\u003e\n\u003cp\u003eTo keep up with demanding use - Polaris is manufactured from aluminium alloy and stainless steel and is designed to work in the harshest of environments. Thanks to the high-quality build Polaris is rated at an IPX6 water-resistant performance, allowing the head to work even in torrential downpours. Despite its high-quality metal build, Polaris weighs only 1.1kg making this a very capable every day or travel tripod head. Even with its low weight Polaris can support camera rigs up to 7kg. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Polaris smart tripod head can capture incredible panoramas, focus stacked images, motion time-lapse, and can even remove people from scenes with People Remover.\u003c\/li\u003e\n\u003cli\u003eAll intelligent functions are easily controllable via a companion smart phone App.\u003c\/li\u003e\n\u003cli\u003eThe Benro Polaris Time Lapse Edition features over 24 hour battery life. It can also be charged during use.\u003c\/li\u003e\n\u003cli\u003eFeaturing Benro’s legendary CNC machining for extra strength and rigidity, Polaris supports camera rigs up to 7.5kg.\u003c\/li\u003e\n\u003cli\u003eWeighing in at 1.1kg, it’s one of the most portable smart tripod heads on the market and is ideal for travel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncluded in the box:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuick Release Plate\u003c\/li\u003e\n\u003cli\u003e3\/8”to 1\/4” Screw Adapter x 2\u003c\/li\u003e\n\u003cli\u003eCarry Case\u003c\/li\u003e\n\u003cli\u003eCharging Cable\u003c\/li\u003e\n\u003cli\u003eType-C Camera Control Cable\u003c\/li\u003e\n\u003cli\u003eMicro-USB Camera Control Cable\u003c\/li\u003e\n\u003cli\u003eMini Camera Control Cable\u003c\/li\u003e\n\u003cli\u003eInstruction Manual ×1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49314377433365,"sku":"BR203","price":1949.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/BR203.png?v=1757950257"},{"product_id":"benro-bvx18cfkpro-carbon-fibre-video-tripod","title":"Benro BVX18CFKPRO Carbon Fibre Video Tripod","description":"\u003ch2\u003eBenro BVX18CFKPRO Carbon Fibre Video Tripod\u003c\/h2\u003e\n\u003cp\u003eThe Benro BVX18CFK is a professional heavy-duty carbon fibre video tripod and head combination. The BVX18H video head supports up to 18kg.\u003c\/p\u003e\n\u003cp\u003eThe 10-step counterbalance (steps 1-10) allows you to dial in the right amount of counterbalance required for each setup. Each step is repeatable which helps save time when changing lenses or adding accessories. The pan drag and tilt drag mechanisms each provide 8 individual steps (1-8) of drag adjustment to help fine tune the smooth movements.\u003c\/p\u003e\n\u003cp\u003eA sliding top plate with a snap-in style quick release can be shifted forward or backward to help properly balance your camera rig. The camera plate comes with one ¼”-20 camera screw and one 3\/8”-16 camera screw. \u003c\/p\u003e\n\u003cp\u003eThe carbon fibre tripod is a 2 stage, 3 section tandem style which incorporates a 100mm bowl. The leg locks are oversized levers that can be operated while wearing gloves. The lower stage leg lock lever has an additional lip, which can be opened and closed with your foot. This allows you to hold onto your camera rig while adjusting the height of the tripod. Each tripod includes a floor spreader, a telescoping pan arm and a padded carrying case.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 3\/8” Mounting Holes\u003c\/li\u003e\n\u003cli\u003eOne ¼” Mounting Hole\u003c\/li\u003e\n\u003cli\u003e100mm Bowl\u003c\/li\u003e\n\u003cli\u003e10 settings for counterbalance\u003c\/li\u003e\n\u003cli\u003e8 settings for pan drag\u003c\/li\u003e\n\u003cli\u003e8 settings for tilt drag\u003c\/li\u003e\n\u003cli\u003eFlip Locks\u003c\/li\u003e\n\u003cli\u003eTwin Spiked Feet with Rubber Foot\u003c\/li\u003e\n\u003cli\u003eAdjustable Floor Spreader\u003c\/li\u003e\n\u003cli\u003e18kg Payload\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49314382151957,"sku":"BVX18CFKPRO","price":4499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/BVX18CFKPRO.jpg?v=1757950535"},{"product_id":"benro-bv10-tandem-leg-tripod-kit","title":"Benro BV10 Tandem Leg Tripod Kit","description":"\u003ch2\u003eBenro BV10 Tandem Leg Tripod Kit \u003c\/h2\u003e\n\u003cp\u003eThe Benro BV10 tripod kit supports up to 10kgs making it a perfect match for studio applications and larger fully rigged video cameras.\u003c\/p\u003e\n\u003cp\u003eAll of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. The 5-step counterbalance (steps 0-4) allows you to dial in the correct amount of counterbalance for your set-up. The 4 step pan \u0026amp; tilt movements make sure your movements are smooth and steady. One 3\/8\" accessory mount come in handy when needing to add a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV10 head to flat base mode for mounting to a slider. Excellent stability is achieved with the integrated 100mm metal ball. The eighth generation two stage aluminium tripod is a double tandem leg design that uses an adjustable, removable spreader, a metal 100mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads, ideal for supporting jibs and fully rigged cameras.\u003c\/p\u003e\n\u003cp\u003eThe tripod system extends to a maximum height of 164cm, while getting as low as 74cm. A carry case and shoulder strap are included.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49314382446869,"sku":"BV10","price":1799.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/BV10.jpg?v=1757950574"},{"product_id":"benro-bv8-tandem-leg-tripod-kit","title":"Benro BV8 Tandem Leg Tripod Kit","description":"\u003ch2\u003eBenro BV8 Tandem Leg Tripod Kit \u003c\/h2\u003e\n\u003cp\u003eThe Benro BV8 tripod kit supports up to 8kg, making it a perfect match for studio applications and larger video cameras.\u003c\/p\u003e\n\u003cp\u003eAll of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera.\u003c\/p\u003e\n\u003cp\u003eThe 5 step counterbalance (steps 0-4) allows you to dial in the correct amount of counterbalance for your set-up. The 4 step pan \u0026amp; tilt movements make sure your movements are smooth and steady. One 3\/8\" accessory mount come in handy when needing to add a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV8 head to flat base mode for mounting to a slider. Excellent stability is achieved with the integrated 75mm metal ball. The eighth generation two stage aluminium tripod is a double tandem leg design that uses an adjustable, removable spreader, a metal 75mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads and rigged cameras.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49314382676245,"sku":"BV8","price":1599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/BV8.jpg?v=1757950636"},{"product_id":"benro-a673tmb-aluminium-tandem-leg-tripod-s8pro-head","title":"Benro A673TMB Aluminium Tandem Leg Tripod \u0026 S8PRO Head","description":"\u003ch2\u003eBenro A673TMB (S8PRO Head) Aluminium Tandem Leg Tripod Kit\u003c\/h2\u003e\n\u003cp\u003eThe Benro A673TMBS8PRO is a 75mm bowl 2 stage\/3 section tandem style video tripod with the S8PRO video head. The tripod also features twist locks and a height adjustable\/removable mid level spreader. Carry case, rubber and dual spiked feet are each included.\u003c\/p\u003e\n\u003cp\u003eBuilt for a range of video cameras and accessories, the S8PRO video head supports up to 8kg. Equipped with a 75mm flat base with a 3\/8\"-16 thread, the S8PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods. Other features include: pan \u0026amp; tilt lock, continuous pan \u0026amp; tilt drag, 8-step counterbalance (0-7), illuminated bubble level and two 3\/8\"-16 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so. Tilt range for the S8PRO is +90\u003cspan\u003e°\u003c\/span\u003e\/-75\u003cspan\u003e°\u003c\/span\u003e. The forward 90\u003cspan\u003e°\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003etilt helps with table top setups. The S8PRO also features metal ratchet style knobs and an improved CNC machined aluminium sliding camera plate.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49314383069461,"sku":"A673TMBS8PRO","price":1249.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/A673TMBS8PRO.jpg?v=1757950751"},{"product_id":"benro-bv6pro-tripod-kit-benro-bv6pro-tripod-kit","title":"Benro BV6PRO Tripod Kit","description":"\u003ch2\u003eBenro BV6PRO Tripod Kit \u003c\/h2\u003e\n\u003cp\u003eThe Benro BV6PRO combines the BV6 video head with the A673TM dual stage tandem style tripod. All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera.\u003c\/p\u003e\n\u003cp\u003eThe 8-step counterbalance (steps 0-7) allows you to dial in the right amount of counterbalance for each setup that helps when changing lenses or adding accessories. The 4-step pan and tilt drag controls offer a more professional style setup and help to repeat smooth movements. Two 3\/8\" accessory mounts come in handy when needing to add a simple audio recorder or monitor. The 2 stage, 3 section tandem tripod legs incorporate a 75mm bowl, height adjustable (and removable) mid-level spreader, oversized quick positive leg locks and rubber feet with dual spiked feet. The BV6PRO has a maximum operating height of 63.0in.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49314383659285,"sku":"BV6PRO","price":1099.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/BV6PRO.jpg?v=1757950885"},{"product_id":"benro-bv4pro-tripod-kit","title":"Benro A573TB Aluminium Tandem Leg Tripod \u0026 S6PRO Head","description":"\u003ch2\u003eBenro A573TB (S6PRO Head) Aluminium Tandem Leg Tripod Kit\u003c\/h2\u003e\n\u003cp\u003eThe Benro A573TBS6PRO is a 75mm bowl 2 stage\/3 section tandem style video tripod with the S6PRO video head. The tripod also features twist locks and a mid level spreader. Carry case, rubber and dual spiked feet are each included.\u003c\/p\u003e\n\u003cp\u003eIdeal for a small video cameras and mirrorless rigs with accessories, the included S6PRO video head supports up to 6kg. Equipped with a 65mm flat base with a 3\/8\"-16 thread, the S6PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods. Other features include: pan \u0026amp; tilt lock, continuous pan \u0026amp; tilt drag, 6-step counterbalance (0-5), illuminated bubble level and two 1\/4\"-20 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so. Tilt range for the S6PRO is +90 degrees\/-75 degrees. The forward 90 degree tilt helps with table top setups. The S6PRO also features metal ratchet style knobs and an improved CNC machined aluminium sliding camera plate.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49314383757589,"sku":"A573TBS6PRO","price":1099.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/A573TBS6PRO.jpg?v=1757951038"},{"product_id":"benro-induro-classic-203-carbon-fibre-tripod","title":"Benro Induro Classic 203 Carbon Fibre Tripod","description":"\u003ch2\u003eBenro Induro Classic 203 Carbon Fibre Tripod\u003c\/h2\u003e\n\u003cp\u003eThese classic expedition-ready tripods have everything adventurous photographers look for to support their professional camera gear. The Induro Classics provide maximum stability, in a compact, unique design, perfect for the evolving image-maker. A unique carbon fibre weave maximizes the strength-to-weight ratio while remaining stealth out in the field. Our tripods are designed for the real world, so the twist locks can be used in any environment with maximum functionality. They’re also dust resistant, and we oversized them so there’s no need to remove your gloves when the cold weather hits. The magnesium spider features V-pattern cross-braces for greater core system stability, strength and lighter weight. The extra rigidity provides the sturdiness needed for long lens photography, while keeping the weight down. Essential when lugging telephoto lenses around. Engineered for stability at any angle, our three-stop adjustable leg locks, and independent leg spread, provide lower angles and maximum stability. An oversized centre column lock makes it easy to secure the grooved column in any vertical position. With interchangeable rubber feet and stainless-steel spikes, you can enhance your stability on any terrain. The built-in bubble level helps maintain a level shot. With the attached weight hook, you can maximize your tripod’s stability. A short column even allows you to position your camera as close to the ground as possible.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic Leg Lock Grips perfectly fit your hand for maximum performance. The textured rubber surface provides a great grip, even when wet or when you're wearing gloves.\u003c\/li\u003e\n\u003cli\u003eOversized Centre Column locking collar provides better grip and vibration reducing support for the column and top mounting plate.\u003c\/li\u003e\n\u003cli\u003eEngineered Three position leg angle locks provide optimum contact between the legs and the spider for greater stability at any angle.\u003c\/li\u003e\n\u003cli\u003eDust and Moisture-resistant leg locks let you work in virtually any real-world environment without concern.\u003c\/li\u003e\n\u003cli\u003eIncluded Tool Kit and Deluxe Carrying Bag with Strap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"product-vid\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/WvKxmZ48NBQ\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388350800149,"sku":"BICLT203","price":579.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/BICLT203.jpg?v=1759380690"},{"product_id":"benro-induro-classic-303-carbon-fibre-tripod","title":"Benro Induro Classic 303 Carbon Fibre Tripod","description":"\u003ch2\u003eBenro Induro Classic 303 Carbon Fibre Tripod\u003c\/h2\u003e\n\u003cp\u003eThese classic expedition-ready tripods have everything adventurous photographers look for to support their professional camera gear. The Induro Classics provide maximum stability, in a compact, unique design, perfect for the evolving image-maker. A unique carbon fibre weave maximizes the strength-to-weight ratio while remaining stealth out in the field. Our tripods are designed for the real world, so the twist locks can be used in any environment with maximum functionality. They’re also dust resistant, and we oversized them so there’s no need to remove your gloves when the cold weather hits. The magnesium spider features V-pattern cross-braces for greater core system stability, strength and lighter weight. The extra rigidity provides the sturdiness needed for long lens photography, while keeping the weight down. Essential when lugging telephoto lenses around. Engineered for stability at any angle, our three-stop adjustable leg locks, and independent leg spread, provide lower angles and maximum stability. An oversized center column lock makes it easy to secure the grooved column in any vertical position. With interchangeable rubber feet and stainless-steel spikes, you can enhance your stability on any terrain. The built-in bubble level helps maintain a level shot. With the attached weight hook, you can maximize your tripod’s stability. A short column even allows you to position your camera as close to the ground as possible.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic Leg Lock Grips perfectly fit your hand for maximum performance. The textured rubber surface provides a great grip, even when wet or when you're wearing gloves.\u003c\/li\u003e\n\u003cli\u003eOversized Centre Column locking collar provides better grip and vibration-reducing support for the column and top mounting plate.\u003c\/li\u003e\n\u003cli\u003eEngineered Three position leg angle locks provide optimum contact between the legs and the spider for greater stability at any angle.\u003c\/li\u003e\n\u003cli\u003eDust and Moisture-resistant leg locks let you work in virtually any real-world environment without concern.\u003c\/li\u003e\n\u003cli\u003eIncluded Tool Kit and Deluxe Carrying Bag with Strap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"product-vid\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/WvKxmZ48NBQ\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388352110869,"sku":"BICLT303","price":669.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/BICLT303.jpg?v=1759380791"},{"product_id":"benro-induro-hydra2-carbon-fibre-waterproof-tripod","title":"Benro Induro Hydra2 Carbon Fibre Waterproof Tripod","description":"\u003ch2\u003eBenro Induro Hydra2 Carbon Fibre Waterproof Tripod\u003c\/h2\u003e\n\u003cp\u003eThis innovative waterproof travel tripod caters to adventurous outdoor photographers needing a rugged all-weather support system for their camera gear. The Hydra2 waterproof tripod provides maximum stability, in a compact, reverse-folding design, perfect for the traveling photographer. With its reverse folding design, the Hydra2 folds down to an impressive 42.4cm, yet it reaches a maximum height of 152cm with the centre column extended. A unique carbon fibre weave maximizes the strength-to-weight ratio while remaining stealth out in the field. It’s waterproof leg locks and feet make this tripod truly ready for the elements, wherever your shot takes you. It features 5 sections, supporting a maximum load of 17kgs. The metal twist locks can be used in any environment with maximum functionality. They’re also dust resistant, and oversized so there’s no need to remove your gloves when the cold weather hits. Engineered for stability at any angle, our three-stop adjustable leg locks, and independent leg spread, provide lower angles and maximum stability. The oversized CNC machined centre column locking collar makes it easy to secure the centre column in any vertical position. With interchangeable rubber feet and stainless-steel spikes, you can enhance your stability on any terrain. The built-in bubble level helps maintain a level shot. While the attached weight hook helps maximise your tripod’s stability. There are three built-in allen keys on these tripods. one located in the rubber foot for adjusting the tension of the leg stop locks on the spider. The other two on the weight hook, one used to tighten down the set screw on the flat base, and the other used to remove the accessory screw on the spider. The accessory mount provides additional mounting flexibility. The Hydra2 also includes a tool kit, drawstring bag and carrying case for storage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWaterproof – It’s waterproof leg locks and feet make this tripod truly ready for the elements, wherever your shot takes you.\u003c\/li\u003e\n\u003cli\u003eOversized Locking Collar – This CNC machined center column locking collar makes it easy to secure the centre column in any vertical position.\u003c\/li\u003e\n\u003cli\u003e3 Built-In Tools - There are three built-in allen keys for adjusting leg tension, set screw and accessory screw.\u003c\/li\u003e\n\u003cli\u003eTravel Friendly - With its reverse folding design, the Hydra2 folds down to an impressive 42.4cm, yet it reaches a maximum height of 152cm with the centre column extended.\u003c\/li\u003e\n\u003cli\u003eCarrying Case Included - The Hydra 2 also includes a tool kit, drawstring bag and carrying case for storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"product-vid\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_psZBcFTshE\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388352373013,"sku":"HYDRA2","price":699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/HYDRA2.jpg?v=1759380970"},{"product_id":"benro-mammoth-44c-carbon-fibre-waterproof-4-section-tripod","title":"Benro Mammoth 44C Carbon Fibre 4-Section Tripod","description":"\u003ch2\u003eBenro Mammoth 44C, Carbon Fibre, 4 Section, Photo Tripod\u003c\/h2\u003e\n\u003cp\u003eThe Benro Mammoth TMTH44C is a 4 section, carbon fibre tripod kit and is perfect for heavy loads, has unmatched versatility and uncompromising performance. Ideal for bird watching, this kit is designed for speed and won’t weigh you down when in use.\u003c\/p\u003e\n\u003cp\u003eThree modes can be achieved:\u003cbr\u003e1. Flat supporting mode\u003cbr\u003e2. Bowl install mode\u003cbr\u003e3. Quick adjustable leveling centre column\u003c\/p\u003e\n\u003cp\u003eThe new design will make assembly easier and more precise. The tripod will also be more stable and consolidated which highly increases the lifetime of the tripod. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe centre column height can be adjusted quickly\u003c\/li\u003e\n\u003cli\u003eThe leveling centre column platform angle is ±20°\u003c\/li\u003e\n\u003cli\u003eWeight hook is under the centre column\u003c\/li\u003e\n\u003cli\u003eThree 3\/8” screw holes are designed to attach different equipment to create your special photo workbench\u003c\/li\u003e\n\u003cli\u003eThe total height of the centre column is 490mm. Lifting range is 0-365mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis item does not come with a head.\u003c\/p\u003e\n\u003cdiv class=\"product-vid\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/-Z4rNMRlsRE\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388352602389,"sku":"TMTH44C","price":649.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/TMTH44C.png?v=1759381091"},{"product_id":"benro-cyanbird-aluminium-tripod-g36pt-ball-head","title":"Benro Cyanbird Aluminium Tripod + G36PT Ball Head","description":"\u003ch2\u003eBenro Cyanbird Aluminium Tripod with G36PT Ball Head\u003c\/h2\u003e\n\u003cp\u003eThe Benro Cyanbird 2 Series Tripod Kits are designed for travel photographers who demand lightweight portability without compromising stability or performance. The 2 Series features a precision-engineered centre column, an inverted low-profile G36PT ball head, and a robust build that supports heavier camera rigs while remaining travel-friendly. Whether you're working with a DSLR, mirrorless setup, or pro accessories, the Cyanbird 2 Series is built to deliver stability at any height—all in a compact form factor that’s easy to pack and carry. \u003c\/p\u003e\n\u003cp\u003eThe Benro Cyanbird 2 Series Tripod Kits with G36PT Head strike the perfect balance between portability, stability, and versatility. The inverted low-profile G36PT ball head enhances balance and control, while the precision-engineered centre column ensures your camera stays steady—whether you're shooting at full height or low angles. With its travel-friendly design, durable materials, and professional-grade ball head, the Cyanbird 2 Series is the ideal choice for creators who need to travel light but work with heavy gear.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExceptional Centre Column Stability: Unlike traditional tripods that sacrifice stability at full height, the CyanBird 2 Series' specially designed centre column and locking mechanism fit snugly for maximum support, even when fully extended\u003c\/li\u003e\n\u003cli\u003eHidden Utility Tool: The center column features a hidden Allen key beneath the weight hook. Unthread it to quickly split the column and switch to low-angle shooting with ease\u003c\/li\u003e\n\u003cli\u003eDurable Build Options: Available in both carbon fiber for ultralight strength and aluminium for rugged durability.\u003c\/li\u003e\n\u003cli\u003eTravel-Ready Design: The CyanBird 2 Series tripod folds down small and stores securely in the included padded carry case for ultimate portability\u003c\/li\u003e\n\u003cli\u003eTop Panning Function: Level your shot with the ball head, then use the independent top panning function for precise, perfectly level panoramas\u003c\/li\u003e\n\u003cli\u003eAdjustable Tension: Fine-tune the ball head’s tension using the innovative pull-and-twist adjuster for smooth, customized movement based on your setup\u003c\/li\u003e\n\u003cli\u003eFull Kit Versatility: The tripod kit supports a wide range of cameras and accessories, making it a must-have for photographers who need a reliable setup for any shooting scenario\u003c\/li\u003e\n\u003cli\u003eSuperior Balance: The low-profile, inverted ball head design of the included G36PT shifts the centre of gravity downward, providing exceptional balance when working with heavier cameras and lenses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NHY_U-57evY?si=syCRX2G5qk9u1XBT\u0026amp;start=31\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388352864533,"sku":"TCBA25G36PT","price":599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/TCBA25G36PT.jpg?v=1759381202"},{"product_id":"benro-mammoth-43c-carbon-fibre-3-section-tripod","title":"Benro Mammoth 43C Carbon Fibre 3-Section Tripod","description":"\u003ch2\u003eBenro Mammoth 43C, Carbon Fibre, 3 Section, Photo Tripod\u003c\/h2\u003e\n\u003cp\u003eThe Benro Mammoth 43C is perfect for heavy loads. With an innovative interchangeable bowl design, Benro Mammoth tripods easily adapt to your support preferences whether you’re shooting photo or video. No matter your shooting situation, a Mammoth tripod can handle it. All Mammoth tripods feature a quick leveling 75mm bowl with 3\/8\"-16 thread, allowing easy mounting of any of Benro’s flat base tripod heads for your shoot. The bowl is also interchangeable with accessories such as the MAC3 center column accessory, and MAP75 flat base adapter.\u003c\/p\u003e\n\u003cp\u003eThe ergonomic rubber twist locks extend or retract the legs with a quick twist. You can set up or break down in seconds. The three-stop adjustable leg locks can be independently locked, providing lower shooting angles and maximum stability. The rubber feet can be unthreaded and replaced with the included spiked feet for even more stability outdoors. Get even more stability with the included weight hook. There are also 3 built-in 3\/8\" accessory mounting holes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Height : 155cm\u003c\/li\u003e\n\u003cli\u003eMinimum Height : 15.5cm\u003c\/li\u003e\n\u003cli\u003eFolded Length : 68cm\u003c\/li\u003e\n\u003cli\u003eWeight : 2.25kg\u003c\/li\u003e\n\u003cli\u003ePayload : 25kg\u003c\/li\u003e\n\u003cli\u003eConverts to Monopod : No\u003c\/li\u003e\n\u003cli\u003eCentre Column : No\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type : Twist Lock\u003c\/li\u003e\n\u003cli\u003eLeg Sections : 3\u003c\/li\u003e\n\u003cli\u003eIndependent Leg Spread : Yes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388353323285,"sku":"TMTH43C","price":599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/TMTH43C.jpg?v=1759381348"},{"product_id":"benro-superslim-aluminium-tripod-n00p-ball-head","title":"Benro SuperSlim Aluminium Tripod + N00P Ball Head","description":"\u003ch2\u003eBenro SuperSlim Aluminium Tripod with N00P Ball Head\u003c\/h2\u003e\n\u003cp\u003eThe SuperSlim Aluminium Tripod with Ball Head from Benro is a versatile and compact tripod designed to meet the needs of all types of photographers, both in the studio and on location. This compact Aluminium tripod can handle up to 4kgs of heavy equipment while still being lightweight enough to carry anywhere. The specially shaped center column saves on size without compromising on strength, contributing to the tripod's slim profile. The centre column can split, allowing super low camera angles when the legs are spread wide. This flexibility is useful when shooting from low perspectives and macro photography. The SuperSlim's legs feature twist lock joints to provide a unique all-metal texture grip allowing for maximum adjustability while fixing the length of each leg. The tripod features multiple 1\/4\"-20 accessory mounts on the leg apex and centre column, allowing additional accessories such as lights, microphones, or other gear to be attached to enhance creative options. When not in use, the tripod collapses down to a very slim profile, making it easy to transport and store.\u003c\/p\u003e\n\u003cp\u003eThe included N00P ball head locks tightly and provides independent smooth panning, which is essential for capturing both stable and panning shots. It features an Arca-type quick release and includes a matching QR plate. Built-in bubble levels on both the N00P ball head and the tripod legs help ensure that shots are perfectly level, enhancing the quality of photographs and video.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact and Lightweight: Benro tripods are known for their ability to handle heavy equipment while still being lightweight, whether you choose the aluminium or carbon fibre version the SuperSlim is no exception.\u003c\/li\u003e\n\u003cli\u003eSpecially Shaped Centre Column: The tripod has a centre column with a unique shape that saves on size without compromising on strength. This design contributes to the tripod's slim profile.\u003c\/li\u003e\n\u003cli\u003eLow Camera Angles: The centre column can split, allowing super low camera angles. This flexibility is useful for various shooting scenarios.\u003c\/li\u003e\n\u003cli\u003eCompact Collapsible Design: When not in use, the tripod collapses down to a very slim profile, making it easy to transport and store.\u003c\/li\u003e\n\u003cli\u003eN00P Ball Head: The ball head on this tripod locks tightly and provides independent smooth panning. This is essential for capturing both stable and panning shots.\u003c\/li\u003e\n\u003cli\u003eBubble Levels: Built-in bubble levels on both the N00P head and legs help ensure that your shots are perfectly level, enhancing the quality of your photographs.\u003c\/li\u003e\n\u003cli\u003eAccessory Mounts: The tripod features multiple ¼-20 accessory mounts, allowing you to attach additional accessories such as lights, microphones, or other gear to enhance your creative options.\u003c\/li\u003e\n\u003cli\u003eLeg Locks: The SuperSlim provides the flexibility to position the tripod at any height and on varying terrain. The SuperSlim’s leg locks also provide a unique all-metal texture grip allowing for maximum adjustability while fixing the length of each leg.\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/PpXBw7pLJsc?si=1YinlePX95RdT3M0\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Height: 156cm\u003c\/li\u003e\n\u003cli\u003eMinimum Height: 18cm\u003c\/li\u003e\n\u003cli\u003eFolded Height: 52cm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.13kg\u003c\/li\u003e\n\u003cli\u003ePayload: 4.5kg\u003c\/li\u003e\n\u003cli\u003eHead Type: Ball Head\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type: Twist\u003c\/li\u003e\n\u003cli\u003eLeg Sections: 4\u003c\/li\u003e\n\u003cli\u003eFeet: Rubber\u003c\/li\u003e\n\u003cli\u003eQR Plate: PU40\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388355551509,"sku":"TSSL08AN00P","price":229.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/TSSL08AN00P.png?v=1759381706"},{"product_id":"benro-cyanbird-carbon-fibre-mini-3-section-tripod-n00p-head","title":"Benro Cyanbird Carbon Fibre Mini 3 Section Tripod + N00P Head","description":"\u003cp\u003eThe Benro MiniBird Carbon Fibre Tripod is the ultimate travel companion for photographers who need a lightweight and portable solution. Comparable in weight to a water bottle, it folds compactly to fit seamlessly in your luggage. With three leg sections and flip locks, it achieves the perfect height for various shooting scenarios. The centre column splits for low-angle shots, and multiple ¼-20 accessory mounts allow for easy attachment of lights, mics and phones. The robust N00P ball head provides strength and usability, securely holding travel-friendly camera kits. The included drawstring bag ensures convenient carrying and protection. Ideal for on-the-go photographers seeking versatility and portability.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-Lightweight Design: The Benro MiniBird Carbon Fibre tripod is incredibly lightweight, comparable to the weight of a water bottle, making it easy to carry anywhere\u003c\/li\u003e\n\u003cli\u003eCompact and Portable: It folds down to fit seamlessly in your luggage, ensuring you can take it with you on any adventure\u003c\/li\u003e\n\u003cli\u003eIdeal Height: With three leg sections and flip locks, it achieves the perfect height for recording in your home studio, shooting while sitting down, or setting up a tether station\u003c\/li\u003e\n\u003cli\u003eVersatile Shooting Angles: Like all Cyanbird tripods, the MiniBird features a centre column that splits for low-angle shooting\u003c\/li\u003e\n\u003cli\u003eMultiple Accessory Mounts: Equipped with three ¼-20 accessory mounts on the column and one on the shoulder, you can easily attach extra lights, mics, your phone or any accessory to enhance your shoot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NHY_U-57evY?si=syCRX2G5qk9u1XBT\u0026amp;start=31\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"n-responsive-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Height : 110.5cm\u003c\/li\u003e\n\u003cli\u003eMinimum Height : 18cm\u003c\/li\u003e\n\u003cli\u003eFolded Length : 45.5cm\u003c\/li\u003e\n\u003cli\u003eWeight : 0.73kg\u003c\/li\u003e\n\u003cli\u003ePayload : 4kg\u003c\/li\u003e\n\u003cli\u003eConverts to Monopod : No\u003c\/li\u003e\n\u003cli\u003eCentre Column : Yes\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type : Flip Lock\u003c\/li\u003e\n\u003cli\u003eLeg Sections : 3\u003c\/li\u003e\n\u003cli\u003eIndependent Leg Spread : Yes\u003c\/li\u003e\n\u003cli\u003eQR Plate : PU40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388358402325,"sku":"TCBC13N00P","price":399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/TCBC13N00P.jpg?v=1759381818"},{"product_id":"benro-a373fb-s8pro-head-aluminium-video-tripod-kit","title":"Benro A373FB (S8PRO Head) Aluminium Video Tripod Kit","description":"\u003ch2\u003eBenro A373FB (S8PRO Head) Aluminium Video Tripod Kit\u003c\/h2\u003e\n\u003cp\u003eThe Benro A373FBS8PRO is a 75mm bowl single tube style video tripod with the S8 PRO video head. The tripod also features flip locks and 3 independent leg position angles. Rubber and spiked feet are both included.\u003c\/p\u003e\n\u003cp\u003eBuilt for a range of video cameras and accessories, the S8PRO video head supports up to 8kg. Equipped with a 75mm flat base with a 3\/8\"-16 thread, the S8PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods. Other features include: pan \u0026amp; tilt lock, continuous pan \u0026amp; tilt drag, 8-step counterbalance (0-7), illuminated bubble level and two 3\/8\"-16 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so. Tilt range for the S8PRO is +90°\/-75°. The forward 90° tilt helps with tabletop setups. The S8PRO also features metal ratchet-style knobs and an improved CNC machined aluminium sliding camera plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Benro A373FBS8PRO Video Tripod Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e75mm Bowl - The tripod features a 75mm metal bowl for leveling the video head.\u003c\/li\u003e\n\u003cli\u003e8 Steps of Counterbalance (0-7) – The S8PRO has 8 individual steps of counterbalance to help properly balance your camera rig.\u003c\/li\u003e\n\u003cli\u003e8kg weight capacity – Supports cameras both large and small.\u003c\/li\u003e\n\u003cli\u003eFlat Base Versatility – Can be used on other flat surfaces with its 3\/8”-16 mounting thread such as sliders, jibs and half ball adapters.\u003c\/li\u003e\n\u003cli\u003eTwo Accessory Mounts – Two 3\/8”-16 mounts for attaching accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Width : 21cm\u003c\/li\u003e\n\u003cli\u003eProduct Height : 84cm\u003c\/li\u003e\n\u003cli\u003eProduct Weight : 4.91kg\u003c\/li\u003e\n\u003cli\u003eLeg Material : Aluminium\u003c\/li\u003e\n\u003cli\u003eSpider Material : Aluminium\u003c\/li\u003e\n\u003cli\u003eBowl Size : 75mm\u003c\/li\u003e\n\u003cli\u003eLeg Sections : 3\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type : Flip Lock\u003c\/li\u003e\n\u003cli\u003eMaximum Payload Capacity : 8kg\u003c\/li\u003e\n\u003cli\u003eMaximum Height : 163.5cm\u003c\/li\u003e\n\u003cli\u003eMinimum Height : 32.5cm\u003c\/li\u003e\n\u003cli\u003eConverts to Monopod : Yes\u003c\/li\u003e\n\u003cli\u003eClosed Length : 80cm\u003c\/li\u003e\n\u003cli\u003eHead Mount : 3\/8\"-16\u003c\/li\u003e\n\u003cli\u003eHead Type : Video Head\u003c\/li\u003e\n\u003cli\u003eCentre Column : No column\u003c\/li\u003e\n\u003cli\u003eForward Tilt Range : 90°\u003c\/li\u003e\n\u003cli\u003eBack Tilt Range : 80°\u003c\/li\u003e\n\u003cli\u003eDrag Control : Continuous\u003c\/li\u003e\n\u003cli\u003ePan Drag (Video - Fixed, Stepped or Continuous) : Continuous\u003c\/li\u003e\n\u003cli\u003eTilt Drag (Video - Fixed, Stepped or Continuous) : Continuous\u003c\/li\u003e\n\u003cli\u003eCounterbalance (Video - # of Steps or Fixed) : Steps\u003c\/li\u003e\n\u003cli\u003ePanning Range : 360°\u003c\/li\u003e\n\u003cli\u003eSeparate Panning Lock : Yes\u003c\/li\u003e\n\u003cli\u003eQuick Release Plate : QR8PRO\u003c\/li\u003e\n\u003cli\u003eQuick Release Camera Thread Size : 1\/4, 3\/8\u003c\/li\u003e\n\u003cli\u003eQuick Release Plate Lock : Yes\u003c\/li\u003e\n\u003cli\u003eQuick Plate Safety Mechanism : Yes\u003c\/li\u003e\n\u003cli\u003eBubble Level : Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388384846101,"sku":"A373FBS8PRO","price":999.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/A373FBS8PRO.jpg?v=1759386059"},{"product_id":"benro-a373fb-s6pro-head-aluminium-video-tripod-kit","title":"Benro A373FB (S6PRO Head) Aluminium Video Tripod Kit","description":"\u003ch2\u003eBenro A373FB (S6PRO Head) Aluminium Video Tripod Kit\u003c\/h2\u003e\n\u003cp\u003eThe Benro A373FBS6PRO is a 75mm bowl single tube style video tripod with the S6PRO video head. The tripod also features flip locks and 3 independent leg position angles. Rubber and spiked feet are both included.\u003c\/p\u003e\n\u003cp\u003eBuilt for a range of video cameras and accessories, the S6PRO video head supports up to 6kg. Equipped with a 75mm flat base with a 3\/8\"-16 thread, the S6PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods. Other features include: pan \u0026amp; tilt lock, continuous pan \u0026amp; tilt drag, 6-step counterbalance (0-5), illuminated bubble level and two 1\/4\"-20 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so. Tilt range for the S6PRO is +90\u003cspan\u003e°\u003c\/span\u003e\/-75\u003cspan\u003e°\u003c\/span\u003e. The forward 90\u003cspan\u003e°\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003etilt helps with table top setups. The S6PRO also features metal ratchet style knobs and an improved CNC machined aluminium sliding camera plate.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388385960213,"sku":"A373FBS6PRO","price":929.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/A373FBS6PRO.jpg?v=1759386195"},{"product_id":"benro-tortoise-34clv-with-s4pro-head-carbon-fibre-video-tripod-kit","title":"Benro Tortoise 34CLV with S4PRO Head Carbon Fibre Video Tripod Kit","description":"\u003cp\u003eThe Tortoise Carbon Fibre 3 Series Tripod System with S4Pro Video Head from Benro is a portable travel-friendly system that supports up to 4kg loads and has a working height range of 235 to 1640mm. The head features a flat base, which makes it well suited to sliders and jibs, while the legs have a leveling ball to flat base head fitting, allowing you to mount the S4Pro to the legs and take advantage of the quick leveling capabilities of a ball base. The carbon fibre legs utilize twist locks leg locks for fast and secure setup. The head fitting on the legs incorporate a 1\/4\"-20 accessory mounting port, allowing you to attach a variety of accessories. The carbon fiber legs feature independent movement with three locking angles and a push-button locking system. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned. You can remove the rubber feet and replace them with the included spiked feet if you wish.\u003c\/p\u003e\n\u003cp\u003eThe S4Pro head has two steps of counterbalance and features fixed pan and tilt drag and has independent pan and tilt locks. The tilt range is +90\/-65°, while the pan range is a full 360°. The included camera plate can be adjusted forward\/backward to let you find the optimal balance for your camera. An integrated safety catch helps ensure that the plate doesn't accidentally slide free and introduce your camera to the effects of gravity. Two camera screws are supplied—1\/4\"-20 and 3\/8\"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1\/4\"-20 threaded hole on each side of the head to which you can secure articulating arms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eS4Pro Fluid Head\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e18kg Payload\u003c\/li\u003e\n\u003cli\u003eFlat base with 3\/8\"-16 female\u003c\/li\u003e\n\u003cli\u003e2 steps of counterbalance\u003c\/li\u003e\n\u003cli\u003eFixed pan and tilt drag\u003c\/li\u003e\n\u003cli\u003eIndependent pan and tilt locks\u003c\/li\u003e\n\u003cli\u003e+90\/-65° tilt range\u003c\/li\u003e\n\u003cli\u003e360° pan range\u003c\/li\u003e\n\u003cli\u003eMade of magnesium and aluminium\u003c\/li\u003e\n\u003cli\u003eRosette adapters on the left and right side for attaching the included pan bar\u003c\/li\u003e\n\u003cli\u003eSliding camera plate with safety lock\u003c\/li\u003e\n\u003cli\u003e1\/4\"-20 and 3\/8\"-16 camera screws included and can be stored on the top of the head or underneath the camera plate\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4\"-20 threaded holes for accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon Fibre Tripod Legs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe legs include a flat base to ball head adapter fitting, allowing you to mount a flat base fluid head onto the legs and enjoy the quick leveling benefits of a ball base.\u003c\/li\u003e\n\u003cli\u003eThe wide leg spread range of the tripod allows you to use it to get as low as 8.86\" off the ground, and as high as 62.4\" above the ground, while maintaining a stable shooting platform.\u003c\/li\u003e\n\u003cli\u003eThe legs feature an \"Auto-Hold Leg Adjustment System\" that allows you to press and release the leg lock, move that leg to position, and then press a button to release the lock on that leg to secure the leg angle.\u003c\/li\u003e\n\u003cli\u003eRubber twist locks allow you to loosen and extend or collapse each leg independently of the other legs. The rubber grips provide a good grip and are gentle on your hands.\u003c\/li\u003e\n\u003cli\u003eThe attached rubber feet feature three distinct angles to contact the mounting surface. This allows the feet to provide a wide contact surface for increased grip and stability when compared to standard conical shaped feet, when the legs are set to acute angles.\u003c\/li\u003e\n\u003cli\u003eThe rubber feet can be removed and replaced with the included spiked feet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"product-vid\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/K5tQ277GUt0\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-vid\"\u003e\n\u003cdiv class=\"n-responsive-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Height : 164cm\u003c\/li\u003e\n\u003cli\u003eMinimum Height : 23.5cm\u003c\/li\u003e\n\u003cli\u003eFolded Length : 66cm\u003c\/li\u003e\n\u003cli\u003eWeight : 2.8kg\u003c\/li\u003e\n\u003cli\u003ePayload : 18kg\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type : Twist Locks\u003c\/li\u003e\n\u003cli\u003eLeg Sections : 4\u003c\/li\u003e\n\u003cli\u003eIndependent Leg Spread : Yes\u003c\/li\u003e\n\u003cli\u003eQR Plate:  QR4PRO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388386484501,"sku":"TTOR34CLVS4PRO","price":799.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/TTOR34CLVS4PRO.jpg?v=1759386405"},{"product_id":"benro-tortoise-24clv-with-s4pro-head-carbon-fibre-video-tripod-kit","title":"Benro Tortoise 24CLV with S4PRO Head Carbon Fibre Video Tripod Kit","description":"\u003ch2\u003e\u003cstrong\u003eBenro Tortoise 24CLV with S4PRO Head, Carbon Fibre, Video Tripod Kit\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Tortoise Carbon Fibre 2 Series Tripod System with S4Pro Video Head from Benro is a portable travel-friendly system that supports up to 4kg loads and has a working height range of 225 to 1590mm. The head features a flat base, which makes it well suited to sliders and jibs, while the legs have a leveling ball to flat base head fitting, allowing you to mount the S4Pro to the legs and take advantage of the quick leveling capabilities of a ball base. The carbon fibre legs utilize twist locks leg locks for fast and secure setup. The head fitting on the legs incorporate a 1\/4\"-20 accessory mounting port, allowing you to attach a variety of accessories. The carbon fibre legs feature independent movement with three locking angles and a push-button locking system. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned. You can remove the rubber feet and replace them with the included spiked feet if you wish.\u003c\/p\u003e\n\u003cp\u003eThe S4Pro head has two steps of counterbalance and features fixed pan and tilt drag and has independent pan and tilt locks. The tilt range is +90\/-65°, while the pan range is a full 360°. The included camera plate can be adjusted forward\/backward to let you find the optimal balance for your camera. An integrated safety catch helps ensure that the plate doesn't accidentally slide free and introduce your camera to the effects of gravity. Two camera screws are supplied—1\/4\"-20 and 3\/8\"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1\/4\"-20 threaded hole on each side of the head to which you can secure articulating arms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eS4Pro Fluid Head\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4kg Payload\u003c\/li\u003e\n\u003cli\u003eFlat base with 3\/8\"-16 female\u003c\/li\u003e\n\u003cli\u003e2 steps of counterbalance\u003c\/li\u003e\n\u003cli\u003eFixed pan and tilt drag\u003c\/li\u003e\n\u003cli\u003eIndependent pan and tilt locks\u003c\/li\u003e\n\u003cli\u003e+90\/-65° tilt range\u003c\/li\u003e\n\u003cli\u003e360° pan range\u003c\/li\u003e\n\u003cli\u003eMade of magnesium and aluminium\u003c\/li\u003e\n\u003cli\u003eRosette adapters on the left and right side for attaching the included pan bar\u003c\/li\u003e\n\u003cli\u003eSliding camera plate with safety lock\u003c\/li\u003e\n\u003cli\u003e1\/4\"-20 and 3\/8\"-16 camera screws included and can be stored on the top of the head or underneath the camera plate\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4\"-20 threaded holes for accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon Fibre Tripod Legs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe legs include a flat base to ball head adapter fitting, allowing you to mount a flat base fluid head onto the legs and enjoy the quick leveling benefits of a ball base.\u003c\/li\u003e\n\u003cli\u003eThe wide leg spread range of the tripod allows you to use it to get as low as 8.86\" off the ground, and as high as 62.4\" above the ground, while maintaining a stable shooting platform.\u003c\/li\u003e\n\u003cli\u003eThe legs feature an \"Auto-Hold Leg Adjustment System\" that allows you to press and release the leg lock, move that leg to position, and then press a button to release the lock on that leg to secure the leg angle.\u003c\/li\u003e\n\u003cli\u003eRubber twist locks allow you to loosen and extend or collapse each leg independently of the other legs. The rubber grips provide a good grip and are gentle on your hands.\u003c\/li\u003e\n\u003cli\u003eThe attached rubber feet feature three distinct angles to contact the mounting surface. This allows the feet to provide a wide contact surface for increased grip and stability when compared to standard conical shaped feet, when the legs are set to acute angles.\u003c\/li\u003e\n\u003cli\u003eThe rubber feet can be removed and replaced with the included spiked feet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"product-vid\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/K5tQ277GUt0\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-vid\"\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Height : 159cm\u003c\/li\u003e\n\u003cli\u003eMinimum Height : 22.5cm\u003c\/li\u003e\n\u003cli\u003eFolded Length : 64.5cm\u003c\/li\u003e\n\u003cli\u003eWeight : 2.48kg\u003c\/li\u003e\n\u003cli\u003ePayload : 4kg\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type : Twist Locks\u003c\/li\u003e\n\u003cli\u003eLeg Sections : 4\u003c\/li\u003e\n\u003cli\u003eIndependent Leg Spread : Yes\u003c\/li\u003e\n\u003cli\u003eHead : S4PRO Video Head\u003c\/li\u003e\n\u003cli\u003eQR Plate : QR4PRO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388387008789,"sku":"TTOR24CLVS4PRO","price":699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/TTOR24CLVS4PRO.jpg?v=1759386531"},{"product_id":"benro-a2573f-s6pro-head-aluminium-video-tripod-kit","title":"Benro A2573F (S6PRO Head) Aluminium Video Tripod Kit","description":"\u003ch2\u003eBenro A2573F (S6PRO Head) Aluminium Video Tripod Kit\u003c\/h2\u003e\n\u003cp\u003eThe Benro A2573FS6PRO is a single tube style, aluminium, video tripod with the S6PRO video head. The centre column includes a levelling adapter so that the head can be levelled independently without having to adjust the tripod legs.\u003c\/p\u003e\n\u003cp\u003eThe tripod also features flip locks, centre column weight hook and 3 independent leg position angles. Rubber and spiked feet are both included.\u003c\/p\u003e\n\u003cp\u003eIdeal for a small video cameras and mirrorless rigs with accessories, the included S6PRO video head supports up to 6kg. Equipped with a 65mm flat base with a 3\/8\"-16 thread, the S6PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods. Other features include: pan \u0026amp; tilt lock, continuous pan \u0026amp; tilt drag, 6-step counterbalance (0-5), illuminated bubble level and two 1\/4\"-20 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so. Tilt range for the S6PRO is +90\u003cspan\u003e°\u003c\/span\u003e\/-75\u003cspan\u003e°\u003c\/span\u003e. The forward 90\u003cspan\u003e°\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003etilt helps with table top setups. The S6PRO also features metal ratchet style knobs and an improved CNC machined Aluminium sliding camera plate.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388387533077,"sku":"A2573FS6PRO","price":679.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/A2573FS6PRO.jpg?v=1759386630"},{"product_id":"benro-a1573f-s2pro-head-aluminium-video-tripod-kit","title":"Benro A1573F (S2PRO Head) Aluminium Video Tripod Kit","description":"\u003ch2\u003eThe Benro A1573F (S2PRO Head) Aluminium Video Tripod Kit\u003c\/h2\u003e\n\u003cp\u003eThe Benro A1573F Tripod with S2PRO 60mm Flat Base Video Head is a compact video system ideal for mirrorless and DSLR camera setups weighing up to 2.5kg. The system features a 60mm flat base head with a 3\/8\"-16 thread and a set of durable aluminium tripod legs. The S2PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods. Made for small cameras and smartphones alike.\u003c\/p\u003e\n\u003cp\u003eThe centre column includes a levelling adapter so that the head can be leveled independently without having to adjust the tripod legs. The tripod also features flip locks, centre column weight hook and 3 independent leg position angles. Rubber and spiked feet are both included. \u003c\/p\u003e\n\u003cp\u003eThe S2PRO head features fixed pan and tilt drag and has independent pan and tilt locks. The tilt range is +90\/-70°. The forward 90-degree tilt helps with tabletop setups. The S2PRO also features an improved CNC machined aluminium sliding camera plate. The pan range is a full 360°. The included pan bar can be attached to the right or left rosette. It also features a bubble level to assist with balancing and two 1\/4\"-20 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so.\u003c\/p\u003e\n\u003cp\u003eA sliding camera plate is included and can be adjusted forward\/backward for optimal balance. A safety lock ensures that once mounted, the plate won't slip out. There are also two 1\/4\"-20 accessory threads that allow you to mount a monitor, extension arm, or other accessories.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeveling Center Column - A leveling base is attached to the top of the center column making it easy to quickly level the head independently of the tripod.\u003c\/li\u003e\n\u003cli\u003e60mm Video Head – The S2PRO is a 60mm flat base (will pair with 75mm half ball) video head with fixed tilt drag, pan drag, tilt lock and pan lock.\u003c\/li\u003e\n\u003cli\u003e2.5kg weight capacity – Supports cameras both large and small.\u003c\/li\u003e\n\u003cli\u003eFlat Base Versatility – Can be used on other flat surfaces with its 3\/8”-16 mounting thread such as sliders, jibs and half ball adapters.\u003c\/li\u003e\n\u003cli\u003eTwo Accessory Mounts – Two 1\/4”-20 mounts for attaching accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Features Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVideo head with 2.5kg payload\u003c\/li\u003e\n\u003cli\u003eThree-section aluminium tripod legs with flip locks\u003c\/li\u003e\n\u003cli\u003eThree independent leg positions\u003c\/li\u003e\n\u003cli\u003e60mm flat base with a 3\/8\"-16 thread\u003c\/li\u003e\n\u003cli\u003eSpiked and rubber feet included\u003c\/li\u003e\n\u003cli\u003eAdjustable centre column with weight hook\u003c\/li\u003e\n\u003cli\u003eFixed pan and tilt drag\u003c\/li\u003e\n\u003cli\u003eIndependent pan and tilt locks\u003c\/li\u003e\n\u003cli\u003e+90\/-70° tilt range\u003c\/li\u003e\n\u003cli\u003e360° pan range\u003c\/li\u003e\n\u003cli\u003eRosette adapters on the left and right side for attaching the included pan bar\u003c\/li\u003e\n\u003cli\u003eSliding aluminium camera plate with safety lock\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4\"-20 threaded holes for accessories \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388390383893,"sku":"A1573FS2PRO","price":449.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/A1573FS2PRO.jpg?v=1759386772"},{"product_id":"benro-s6pro-video-head","title":"Benro S6PRO Video Head","description":"\u003ch2\u003eBenro S6PRO Video Head\u003c\/h2\u003e\n\u003cp\u003eFeaturing a 65mm flat base with a 3\/8\"-16 threaded hole, the Benro S6PRO Fluid Video Head can efficiently be moved between compatible tripods and sliders, jibs, monopods and other support gear.\u003c\/p\u003e\n\u003cp\u003eThe Benro S6PRO Fluid Video Head supports up to 6kg loads and offers 5+0 steps of counterbalance and continuous pan and tilt drag. There are also independent pan and tilt locks. The tilt range is a wide +90\/-75°, and the pan range is a full 360°.\u003cbr\u003e\u003cbr\u003eSome parts of the head are made of magnesium and other parts of aluminium. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left or right handed users. A camera plate is included that can be adjusted forward\/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it in either direction too much. Two camera screws are supplied - 1\/4\"-20 and 3\/8\"-16 - that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1\/4\"-20 threaded hole on each side of the head to which you can secure articulating arms.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388390646037,"sku":"S6PRO","price":419.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/S6PRO.jpg?v=1759386937"},{"product_id":"benro-s2pro-video-head","title":"Benro S2PRO Video Head","description":"\u003ch2\u003eBenro S2PRO Video Head\u003c\/h2\u003e\n\u003cp\u003eThe new and improved S2PRO is based on the S2. Providing stability in operation and counterbalance it also comes with a new look.\u003c\/p\u003e\n\u003cp\u003eMade for small cameras and smartphones alike, the S2PRO is a versatile flat base video head. The S2PRO video head supports up to 2.5kg. Equipped with a 60mm flat base with a 3\/8\"-16 thread, the S2PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods. Other features include: pan \u0026amp; tilt lock, fixed pan \u0026amp; tilt drag, bubble level and two 1\/4\"-20 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so. Tilt range for the S2PRO is +90°\/-70°. The forward 90 degree tilt helps with table top setups. The S2PRO also features an improved CNC machined aluminium sliding camera plate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e60mm Video Head – The S2PRO is a 60mm flat base (will pair with 75mm half ball) video head with fixed tilt drag, pan drag, tilt lock and pan lock.\u003c\/li\u003e\n\u003cli\u003eTwo Accessory Mounts – Two 1\/4\"-20 mounts for attaching accessories.\u003c\/li\u003e\n\u003cli\u003e2.5kg weight capacity – Supports cameras both large and small.\u003c\/li\u003e\n\u003cli\u003eFlat Base Versatility – Can be used on other flat surfaces with its 3\/8\"-16 mounting thread such as sliders, jibs and half ball adapters.\u003c\/li\u003e\n\u003cli\u003eCNC machined camera plate – The S2PRO includes a CNC machined aluminium sliding camera plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/IEI2P_ROyPg\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388391366933,"sku":"S2PRO","price":189.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/S2PRO.jpg?v=1759387147"},{"product_id":"benro-a38fd-monopod-s2pro-head","title":"Benro A38FD Monopod \u0026 S2PRO Head","description":"\u003ch2\u003eBenro A38FD Monopod \u0026amp; S2PRO Head\u003c\/h2\u003e\n\u003cp\u003eThe Benro A38FDS2PRO is a travel-friendly flip lock video monopod provides a 2.5kg payload capacity ideal for small cameras and smartphones. The S2PRO Video Monopod Kit features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. Made for small cameras and smartphones alike, the S2PRO is a versatile flat base video head.\u003c\/p\u003e\n\u003cp\u003eThe S2PRO video head supports up to 2.5kg. Equipped with a 60mm flat base with a 3\/8\"-16 thread, the S2PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods. Other features include: pan \u0026amp; tilt lock, fixed pan \u0026amp; tilt drag, bubble level and two 1\/4\"-20 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so. Tilt range for the S2PRO is +90°\/-70°. The forward 90-degree tilt helps with table top setups. The S2PRO also features an improved CNC machined aluminium sliding camera plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Benro A38FD Monopod \u0026amp; S2PRO Head features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTravel-ready video monopod providing a 2.49kg load capacity\u003c\/li\u003e\n\u003cli\u003eLarge pan bar for smooth and precise movements and control\u003c\/li\u003e\n\u003cli\u003eThree flip locks for quick and easy height adjustment\u003c\/li\u003e\n\u003cli\u003e60mm flat base provides compatibility with flat surfaces and half ball adapters\u003c\/li\u003e\n\u003cli\u003eTwo Accessory Mounts – Two 1\/4”-20 mounts for attaching accessories.\u003c\/li\u003e\n\u003cli\u003eLarge foldout feet for stability\u003c\/li\u003e\n\u003cli\u003e3 Leg Monopod Base - Locking base with ball joint\u003c\/li\u003e\n\u003cli\u003e2.5kg weight capacity – Supports cameras both large and small.\u003c\/li\u003e\n\u003cli\u003eFlat Base Versatility – Can be used on other flat surfaces with its 3\/8”-16 mounting thread such as sliders, jibs and half ball adapters.\u003c\/li\u003e\n\u003cli\u003eCNC machined camera plate – The S2PRO includes a CNC machined aluminium sliding camera plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cdiv class=\"n-responsive-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Weight : 1.57kg\u003c\/li\u003e\n\u003cli\u003eProduct Height : 164.5cm\u003c\/li\u003e\n\u003cli\u003eLeg Material : Aluminium\u003c\/li\u003e\n\u003cli\u003eSeries : 3\u003c\/li\u003e\n\u003cli\u003eLeg Sections : 4\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type : Flip Lock\u003c\/li\u003e\n\u003cli\u003eMaximum Payload Capacity : 2.49kg\u003c\/li\u003e\n\u003cli\u003eMaximum Height : 155cm\u003c\/li\u003e\n\u003cli\u003eMinimum Height : 54cm\u003c\/li\u003e\n\u003cli\u003eClosed Length : 9.6cm\u003c\/li\u003e\n\u003cli\u003eBase Mount Thread : 3\/8\"-16\u003c\/li\u003e\n\u003cli\u003ePanning Range : 360°\u003c\/li\u003e\n\u003cli\u003eFoot Type : Locking Three Leg Folding Base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388584239381,"sku":"A38FDS2PRO","price":299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/A38FDS2PRO.jpg?v=1759404660"},{"product_id":"benro-adventure-mad38c-8x-carbon-fibre-monopod","title":"Benro Adventure MAD38C 8X Carbon Fibre Monopod","description":"\u003ch2\u003eBenro Adventure MAD38C 8X Carbon Fibre Monopod\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis classic design monopod, the Adventure MAD38C, offers advanced features and controls for exploring every style of photography. The Adventure combines 8X carbon fibre with quick flip leg locks creating a lightweight and easy to use monopod.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecification:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Height : 158.5cm\u003c\/li\u003e\n\u003cli\u003eMinimum Height : 52.5cm\u003c\/li\u003e\n\u003cli\u003eFolded Length : 52.5cm\u003c\/li\u003e\n\u003cli\u003eHeight with Column Extended : 158.5cm\u003c\/li\u003e\n\u003cli\u003eWeight : 0.5kg\u003c\/li\u003e\n\u003cli\u003ePayload : 16kg\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type : Flip Lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388585812245,"sku":"MAD38C","price":229.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/MAD38C_ad7dfa13-dc14-4f10-b44c-96919c8b72a0.jpg?v=1759404789"},{"product_id":"benro-adventure-mad49c-8x-carbon-fibre-monopod","title":"Benro Adventure 8X Carbon Fibre Monopod","description":"\u003ch2\u003eBenro Adventure MAD49C 8X Carbon Fibre Monopod\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis classic design monopod, the Adventure MAD49C, offers advanced features and controls for exploring every style of photography. The Adventure combines 8X carbon fibre with quick flip leg locks creating a lightweight and easy to use monopod.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Height : 183cm\u003c\/li\u003e\n\u003cli\u003eMinimum Height : 52.5cm\u003c\/li\u003e\n\u003cli\u003eFolded Length : 52.5cm\u003c\/li\u003e\n\u003cli\u003eHeight with Column Extended : 183cm\u003c\/li\u003e\n\u003cli\u003eWeight : 0.62kg\u003c\/li\u003e\n\u003cli\u003ePayload : 18kg\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type : Flip Lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49388587057429,"sku":"MAD49C","price":279.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/MAD49C.jpg?v=1759404859"},{"product_id":"benro-supadupa-pro-carbon-fibre-monopod-with-pivot-leg-base","title":"Benro Supadupa Pro Carbon Fibre Monopod with Pivot Leg Base","description":"\u003cp\u003eBenro have a new collection of Monopods that really are deserving of their name Supadupa.\u003c\/p\u003e\n\u003cp\u003eMonopods from their very design and nature of purpose provide photographers and videographers with flexibility in how they work, from the location to how close they get to their subject.\u003c\/p\u003e\n\u003cp\u003eThe Supadupa collection of 3 carbon fibre monopods are no exception in delivering on fulfilling what you would expect, but with the addition of Benro craftsmanship and engineering, this collection have some great additional features that will make them a great complement to your range.\u003c\/p\u003e\n\u003cp\u003eThe MSDPL46C comes with a levelling base on which to place the camera. This model provides complete precision for shots and footage. The key features include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevelling base with 360° rotation with the ability to fix in place\u003c\/li\u003e\n\u003cli\u003eSafety knob for the quick release plate\u003c\/li\u003e\n\u003cli\u003eLevelling base adjustable angle of ±20°\u003c\/li\u003e\n\u003cli\u003eCNC machined aluminium flip lock and joint\u003c\/li\u003e\n\u003cli\u003eWaterproof tubing structure\u003c\/li\u003e\n\u003cli\u003eDetachable rotation foot, the spikes can be mounted after removing\u003c\/li\u003e\n\u003cli\u003eShoulder strap support for ease of carrying and to enable different shooting styles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Width : 7cm\u003c\/li\u003e\n\u003cli\u003eProduct Height : 50cm\u003c\/li\u003e\n\u003cli\u003eProduct Weight : 0.9kg\u003c\/li\u003e\n\u003cli\u003eLeg Material : Carbon Fibre\u003c\/li\u003e\n\u003cli\u003eLeg Sections : 6\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type : Twist \u0026amp; Flip Lock\u003c\/li\u003e\n\u003cli\u003eMaximum Payload Capacity : 32kg\u003c\/li\u003e\n\u003cli\u003eMaximum Height : 158cm\u003c\/li\u003e\n\u003cli\u003eClosed Length : 48.5cm\u003c\/li\u003e\n\u003cli\u003eHead Mount : 1\/4\" \u0026amp; 3\/8\"\u003c\/li\u003e\n\u003cli\u003eBase Mount Thread : 1\/4\" \u0026amp; 3\/8\"\u003c\/li\u003e\n\u003cli\u003eForward Tilt Range : 0-20°\u003c\/li\u003e\n\u003cli\u003eBack Tilt Range : 0-20°\u003c\/li\u003e\n\u003cli\u003eDrag Control : Fixed\u003c\/li\u003e\n\u003cli\u003ePan Lock (Video) : Yes\u003c\/li\u003e\n\u003cli\u003eTilt Lock (Video) : Yes\u003c\/li\u003e\n\u003cli\u003ePan Drag (Video - Fixed, Stepped or Continuous) : Fixed\u003c\/li\u003e\n\u003cli\u003eTilt Drag (Video - Fixed , Stepped or Continuous) : Fixed\u003c\/li\u003e\n\u003cli\u003eCounterbalance (Video - # of Steps or Fixed) : Fixed\u003c\/li\u003e\n\u003cli\u003ePanning Range : 0-360°\u003c\/li\u003e\n\u003cli\u003eSeparate Panning Lock : Yes\u003c\/li\u003e\n\u003cli\u003eQuick Release Type : PU58\u003c\/li\u003e\n\u003cli\u003eBubble Level : Yes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49673524281621,"sku":"MSDPL46C","price":369.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/MSDPL46C.jpg?v=1767130707"},{"product_id":"benro-adventure-8x-carbon-fibre-monopod","title":"Benro Supadupa Carbon Fibre Monopod with Pivot Leg Base","description":"\u003cp\u003eBenro have a new collection of Monopods that really are deserving of their name Supadupa.\u003c\/p\u003e\n\u003cp\u003eMonopods from their very design and nature of purpose provide photographers and videographers with flexibility in how they work, from the location to how close they get to their subject.\u003c\/p\u003e\n\u003cp\u003eThe Supadupa collection of 3 carbon fibre monopods are no exception in delivering on fulfilling what you would expect, but with the addition of Benro craftsmanship and engineering, this collection have some great additional features that will make them a great complement to your range.\u003c\/p\u003e\n\u003cp\u003eThe MSD46C SupaDupa monopod features water-proof (and dust proof) twist locks. An impressive maximum height of 183cm and folding down to 45.5cm. The round rotating foot features a built-in v-shaped bearing, so you can glide from shot to shot without lifting a foot. And it can be swapped out for the included spiked foot, for added stability. Combining twist locks with a CNC-machined, fast-action flip lock, it’s simple to fully extend, and then fine-tune the height of your monopod, with our newly added quick flip lock. The included wrist strap provides convenient as well as secure handling.\u003c\/p\u003e\n\u003cp\u003eThe MSD46C provides all the features of the MSDPL46C without the levelling base. This monopod includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined aluminium flip lock and joint\u003c\/li\u003e\n\u003cli\u003eWaterproof tubing structure\u003c\/li\u003e\n\u003cli\u003eDetachable rotation foot, spikes can be mounted after removing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Width : 6cm\u003c\/li\u003e\n\u003cli\u003eProduct Height : 47cm\u003c\/li\u003e\n\u003cli\u003eProduct Weight : 0.59kg\u003c\/li\u003e\n\u003cli\u003eLeg Material : Carbon Fibre\u003c\/li\u003e\n\u003cli\u003eLeg Sections : 6\u003c\/li\u003e\n\u003cli\u003eLeg Lock Type : Twist \u0026amp; Flip Lock\u003c\/li\u003e\n\u003cli\u003eMaximum Payload Capacity : 40kg\u003c\/li\u003e\n\u003cli\u003eMaximum Height : 183cm\u003c\/li\u003e\n\u003cli\u003eMinimum Height : 46.5cm\u003c\/li\u003e\n\u003cli\u003eClosed Length : 46.5cm\u003c\/li\u003e\n\u003cli\u003eHead Mount : 1\/4\" \u0026amp; 3\/8\"\u003c\/li\u003e\n\u003cli\u003eBase Mount Thread : 1\/4\" \u0026amp; 3\/8\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49673525494037,"sku":"MSD46C","price":249.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/MSD46C.jpg?v=1767131078"},{"product_id":"benro-msd46c72-supadupa-carbon-fibre-tall-monopod-with-tilt-head","title":"Benro Supadupa 72 Carbon Fibre Tall Monopod with Tilt Head","description":"\u003cp\u003eIntroducing the SupaDupa72 Monopod from Benro, a game-changer for photographers seeking excellence in long lens photography. This carbon fibre monopod has been crafted with meticulous attention to detail to make your photography experiences a breeze. Here's what sets the SupaDupa72 Monopod apart:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy Carbon Fibre Construction: This monopod is built to last, capable of effortlessly supporting the weight of long lenses while remaining remarkably lightweight and portable.\u003c\/li\u003e\n\u003cli\u003eStands Tall: The 72\" max height makes sure you will never have to stoop (bend) while tracking your subject.\u003c\/li\u003e\n\u003cli\u003eComfortable Padded Grip: The padded grip ensures your hands and shoulders stay comfortable during extended use. And if it's ever in the way, it can be easily removed.\u003c\/li\u003e\n\u003cli\u003eEffortless Lock Adjustment: Thanks to strategically placed locks, you can adjust the monopod with one hand, leaving their shutter finger free to capture stunning images.\u003c\/li\u003e\n\u003cli\u003eDetachable Hand Strap: Safety is paramount, and the detachable hand strap keeps your customers and their gear securely attached at the wrist, reducing the risk of accidental drops.\u003c\/li\u003e\n\u003cli\u003eSmooth Panning with Rubber Foot: A rubber foot with ball bearings enables smooth panning movements, enhancing the quality of their shots. For added stability on uneven terrain, there's also a spike foot option.\u003c\/li\u003e\n\u003cli\u003eIntegrated Tilt Head: The 72 model of this monopod line boasts an integrated tilt head that allows for a wide range of angles and movements without the need to lean over. Repositionable Knobs: All knobs on the tilt head are repositionable, ensuring they won't interfere with each other. This simplifies precise adjustments.\u003c\/li\u003e\n\u003cli\u003eArca Clamp Included: With an included Arca clamp, customers can mount their camera directly to the tilt head, giving them more control over their shooting angles. Perfect for seamless transitions between monopod and tripod setups.\u003c\/li\u003e\n\u003cli\u003eConvenient Carry Case: When the shoot is done, the SupaDupa72 monopod easily fits into the included carry case, simplifying transportation and gear protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe SupaDupa72 Monopod is set to become an indispensable tool for photographers using long lenses. Make sure you have access to this exceptional piece of photography equipment by adding it to your inventory today.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFolded Length:  49cm\u003c\/p\u003e\n\u003cp\u003eMinimum Height:  49cm\u003c\/p\u003e\n\u003cp\u003eMaximum Height:  183cm\u003c\/p\u003e\n\u003cp\u003eLeg Sections:  6\u003c\/p\u003e\n\u003cp\u003ePayload:  8kg\u003c\/p\u003e\n\u003cp\u003eProduct Weight:  0.9kg\u003c\/p\u003e\n\u003cp\u003eQuick Release Plate:  PU30\u003c\/p\u003e","brand":"Benro","offers":[{"title":"Default Title","offer_id":49673528770837,"sku":"MSD46C72","price":549.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/0252\/0085\/files\/1699884019_1794869.jpg?v=1767131379"}],"url":"https:\/\/www.cameraelectronic.com.au\/collections\/benro.oembed?page=2","provider":"Camera Electronic","version":"1.0","type":"link"}