Elinchrom D-Lite 400W/s RX 4 Flash Head



PRODUCT HIGHLIGHTS

  • Built-in Skyport Wireless Receiver
  • Multi-voltage Monolight: 90-260VAC
  • Recycling: 0.35-1.6 Sec. (115V)
  • Flash Duration: 1/800 Sec (Full Power)
  • 5 Stop Power Variability in 1/10 Stops
  • Pre-Flash Detector
  • Fan-Cooled, Auto Dump
  • Optional iPhone, iPad, iPod Touch Apps
  • Accepts 7-8 mm Umbrella Shafts
  • Firmware Update Options

$528.00
Sold Out - Backorder Available

$528.00
Sold Out - Backorder Available



Shipping options


The Elinchrom D-Lite 400W/s RX 4 Flash Head raises the bar on the capabilities of a lightweight, portable strobe. The auto-sensing, multi-voltage flash D-Lite RX 4 recognizes any AC power source from 90-260VAC, allowing power variability over 5.0 stops in 1/10 stop increments. Recycling is a lightning-fast 0.35-1.6 sec. (115V) with flash durations as short as an action-stopping 1/800 sec at full power. But that's just the beginning.

The D-Lite 400W/s RX 4 is packed with professional and convenience features usually found in flash heads twice its price. Forget about tripping over PC cords. Although this head accepts one it also has a built-in EL-Skyport Receiver with eight frequency channels that can handle four distinct groups of flashes. Separate purchase of the EL Skyport ELS Speed Transmitter not only allows you to trigger your flash at distances up to 393feet but gives you control of power on/off, modelling light functions and Speed Sync activation. Free software for Mac and PC computers are available, providing additional features such as Flash-Delay for strobing effects. Add an optional Wi-Fi module to the transmitter and you can use specially designed apps that allow full remote control via your for iPhone, iPad or iPod Touch.

D-Lite 400W/s RX 4's bayonet mount accepts all Elinchrom accessories and softboxes up to 53inch (135 cm). It comes with a power cord with a U.S. plug, sync cord, flash tube and protective cap. The included 120V 100W modelling lamp must be swapped out when using the unit in nominal 230V electrical environments.

Note: Reflector not included

Basic Features

  • Built-in EL-Skyport receiver for triggering
  • 8 Frequency channels with 4 groups
  • Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
  • Pre-Flash detector system to enable the use of D-Lite RX with speedlights
  • Power Auto-dump
  • 5V sync socket for maximum protection of digital cameras
  • Automatic temperature controlled ventilation
  • Multi-voltage auto-detection: 90-260VAC (excluding modeling lamp)
  • Lightweight but strong housing. Robust, functional and elegant
  • Accessory bayonet accepts all accessories and Rotalux softboxes up to 53inch (135 cm)
  • Rubberized large handle with spare fuse storage
  • Stand bracket with extra umbrella fitting for larger umbrella shafts

Enhancements

  • Take full control of your unit's settings with the optional EL-Skyport App for iPhone, iPad and iPod Touch via the optional WiFi module
  • Additional features such as Flash-Delay for strobing-effects can be accessed via the free EL-Skyport Software
  • Visual Flash Confirmation option. The modeling lamp comes on to confirm the flash has been triggered and goes off when recycling
  • Proportional adjustment of the modeling lamp
  • Variable f/stop steps: 1/1, 5/10, 4/10, 3/10, 2/10 or 1/10 steps are available
  • Programmable ready beep function
  • Firmware update option

(01-20487)


PRODUCT HIGHLIGHTS

  • Built-in Skyport Wireless Receiver
  • Multi-voltage Monolight: 90-260VAC
  • Recycling: 0.35-1.6 Sec. (115V)
  • Flash Duration: 1/800 Sec (Full Power)
  • 5 Stop Power Variability in 1/10 Stops
  • Pre-Flash Detector
  • Fan-Cooled, Auto Dump
  • Optional iPhone, iPad, iPod Touch Apps
  • Accepts 7-8 mm Umbrella Shafts
  • Firmware Update Options

Elinchrom D-Lite 400W/s RX 4 Flash Head

Maximum Watt/Seconds 400
Flash Variability 5.0 Stops in 1/10th stop increments (25 - 400W/s)
Recycle Time
  • @ 230V: 0.35 - 1.2 sec
  • @ 115V: 0.35 - 1.6 sec
Flash Duration 1/800 Sec.
Voltage Stabilization 0.5%
Auto Dump Yes
Power Requirements Multi voltage, 90-260VAC
Modeling Light Wattage
  • 100W
  • Control: Proportional, Low, Full, Off
User Replaceable Flashtube Yes
Umbrella Mount
  • Centered tub, for EL-umbrellas 7.0 mm diameter
  • Extra fitting on bracket for larger sized shafts
Sync Voltage 5.0V Compatibility with digital cameras
Power Consumption
  • 115VAC, 60Hz: No flash / recycling 160W / 850VA
  • 230VAC, 50Hz: No flash / recycling 140W / 1,200VA
Triggering
  • Synch cord (3.5 mm), optical slave
  • Integrated Receiver, 4 groups, 8 frequencies
  • Receiver range: 164' (50 m)indoors, 393' (120 m) outdoors
Changeable Reflector Yes
Flash Ready Indicator Audible, visual
Fan Cooled Yes
Dimensions 10.2 x 7.5 x 5.5" (26 x 19 x 14 cm)
Weight 3.3 lb (1.5 kg)

Packaging Info

Package Weight 5.4 lb
Box Dimensions (LxWxH) 15.0 x 8.5 x 7.0"
SKU 01-20487
Brand Elinchrom
Unit Of Measure ea

Be The First To Review This Product!

Help other Camera Electronic users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category