Elinchrom D-Lite RX One Flash Head



PRODUCT HIGHLIGHTS

  • 100W/s
  • Built-in Skyport Wireless Receiver
  • Multi-voltage Monolight: 90-260VAC
  • Recycling: 0.5 - 2.1 Sec. (115V)
  • Flash Duration: 1/1,100 Sec (Full Power)
  • 5 Stop Power Variability in 1/10 Stops
  • Pre-Flash Detector
  • Fan-Cooled, Auto Dump
  • Optional iPhone, iPad, iPod Touch Apps
  • Accepts 7-8 mm Umbrella Shafts

$315.00
Sold Out - Backorder Available

$315.00
Sold Out - Backorder Available



Shipping options


We Also Recommend

The Elinchrom D-Lite RX One Flash Head is a 100W/s auto-sensing, multi-voltage monolight that recognizes any AC power source from 90-260VAC, allowing power variability over 5.0 stops in 1/10 stop increments. Recycling is a fast 0.5-2.1 sec. (@115V) with flash durations as short as an action-stopping 1/1,100 sec at full power.


The D-Lite RX One is packed with professional and convenience features usually found in flash heads twice its price. Although this head accepts one, you won't need a PC cord. It has a built-in EL Skyport Receiver with 8 frequency channels that can handle 4 distinct groups of flashes. Separate purchase of the EL Skyport Speed Transmitter not only allows you to trigger your flash at distances up to 393feet but gives you control of power on/off, modeling light functions and Speed Sync activation. Free software for Mac and PC computers is available, providing additional features such as Flash-Delay for strobing effects. Add an optional WiFi module to the transmitter and you can use specially designed apps that allow full remote control from your for iPhone, iPad or iPod Touch.

D-Lite RX One's bayonet mount accepts all Elinchrom accessories and softboxes up to 53inch (135 cm). It comes with a power cord with a U.S. plug, sync cord, flash tube and protective cap. The included 115V 100W modeling lamp must be swapped out when using the unit in nominal 230V electrical environments.

Basic Features

  • Built-in EL Skyport receiver for triggering
  • 8 Frequency channels with 4 groups
  • Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
  • Pre-Flash detector system to enable the use with speedlights
  • Power Auto-dump
  • 5V sync socket for maximum protection of digital cameras
  • Automatic temperature controlled ventilation
  • Multi-voltage auto-detection: 90-260VAC (excluding modeling lamp)
  • Lightweight but strong housing. Robust, functional and elegant
  • Accessory bayonet accepts all accessories and Rotalux softboxes up to 53inch (135 cm)
  • Rubberized large handle with spare fuse storage
  • Stand bracket with extra umbrella fitting for larger umbrella shafts

Enhancements

  • Radio remote control of flash power settings, modeling lamp on/off, speed sync mode and triggering
  • Take full control of your unit's settings with the optional EL Skyport App for iPhone, iPad and iPod Touch via the optional Wi-Fi module
  • Additional features such as Flash-Delay for strobing effects can be accessed via the free EL Skyport Software
  • Visual Flash Confirmation option. The modeling lamp comes on to confirm the flash has been triggered and goes off when recycling
  • Proportional adjustment of the modeling lamp
  • Variable f/stop in 1/10 stop increments
  • Programmable ready beep function
  • Firmware update option

(01-20485)


PRODUCT HIGHLIGHTS

  • 100W/s
  • Built-in Skyport Wireless Receiver
  • Multi-voltage Monolight: 90-260VAC
  • Recycling: 0.5 - 2.1 Sec. (115V)
  • Flash Duration: 1/1,100 Sec (Full Power)
  • 5 Stop Power Variability in 1/10 Stops
  • Pre-Flash Detector
  • Fan-Cooled, Auto Dump
  • Optional iPhone, iPad, iPod Touch Apps
  • Accepts 7-8 mm Umbrella Shafts

Elinchrom D-Lite RX One Flash Head

Maximum Watt/Seconds 100
Flash Variability 5.0 Stops in 1/10th stop increments
Recycle Time
  • @ 230V: 0.44 - 1.5 sec
  • @ 115V: 0.45 - 2.1 sec
Flash Duration 1/1,100 - 1/2,200 Sec. min./max. @ t0.5
Voltage Stabilization 0.5%
Auto Dump Yes
Power Requirements Multi voltage, 90-260VAC
Modeling Light Wattage
  • 100W
  • Control: Proportional, Low, Full, On/Off
User Replaceable Flashtube Yes
Umbrella Mount
  • Centered tub, for EL-umbrellas 7.0 mm diameter
  • Extra fitting on bracket for larger sized shafts
Flash Sync Up to 1/320 sec.
Sync Voltage 5.0V Compatibility with digital cameras
Power Consumption
  • 230VAC, 50Hz: No flash / recycling 140W / 310
  • 115VAC, 60Hz: No flash / recycling 190W / 280VA
Triggering Synch
  • cord (3.5 mm), optical slave
  • Integrated Receiver, 4 groups, 8 frequencies
  • Receiver range: 164' (50 m) indoors, 393' (120 m) outdoors
Changeable Reflector Yes
Flash Ready Indicator Audible, visual
Fan Cooled Yes
Dimensions 7.0 x 7.5 x 5.5" (18 x 19 x 14 cm)
Weight 1.98 lb (0.9 kg)

Packaging Info

Package Weight 4.05 lb
Box Dimensions (LxWxH) 11.1 x 8.4 x 7.2"
SKU 01-20485
Brand Elinchrom
Unit Of Measure ea

Be The First To Review This Product!

Help other Camera Electronic users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category