Ikan EC1 Beholder Gimbal for DSLRs & Mirrorless Cameras With Dual Grip Handles

Not yet rated

SKU: IKA01483



PRODUCT HIGHLIGHTS

  • Durable All Aluminum Construction
  • 360 Degree Movement from All Axis (Pitch, Yaw & Roll)
  • Works with DSLR's & Mirrorless Cameras between 2.0 to 4.5 lbs
  • Equipped with 3 Axis Gyro Stabilized Brushless Motors to Balance Most Mirrorless & DSLR Cameras
  • OLED Display Screen to show operating modes
  • Equipped with 32-Bit Controller & 12-Bit Encoder
  • Lithium Battery Powered- Low Maintenance, Eco-Friendly
  • Illuminated ON-OFF Switch/Battery Indicator 3/8"-16 Tripod Mount Socket

Shipping options


$1,628.00

The Beholder EC1 is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of medium and small cameras weighing up to 5lbs. The Beholder EC1 is lightweight, easy to use, and can be carried in the supplied case or a small photographer bag.

360 Motors
The 3-Axis gimbal features three 360 degree rotating brushless motors that give you a limitless range of motion.

Designed for DSLR & Mirrorless Cameras
With a payload of up to 5 lbs., the EC1 has the ability to stabilize a wide range of today's popular DSLR and mirrorless cameras.
Sony a6300, Sony a7SII, Panasonic GH4, and the Canon 5D Mark III are just a few cameras that the EC1 can handle.

Advanced Stabilization
Using a 32-blt controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer.

Lock Mode
In Lock Mode, the Yaw, Pitch, and Roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle.

Point & Lock
Quickly lock your camera into any position by manually pointing and holding It In any direction. After a few seconds, the camera will lock and hold its position until It Is reset back to default.

Auto Inversion
Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.

Multiple Follow Modes
The EC1 features 3 different follow modes. In Yaw-Axis Follow Mode, the EC1 will only follow your Pan movements. In Pitch and Yaw-Axis Follow Mode, the EC1 will follow your Pan and Tilt Movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to Pan, Tilt, and Roll.

OLED Status Display
A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode. 

Easy to Use
With a newly designed quick-release baseplate system, the EC1 is easy to balance without the need of any tools.

Multiple Mounting Options
The EC1 handle comes with two 1/4-20 mounts that are perfect for mounting accessories such as a light, microphone, or monitor. A 3/8-16 thread located on the bottom allows you to secur9ly mount the EC1 to a tripod, jib, or dual handle support system such as the lkan DGH.

What's Included

EC1
1x Battery Cap With 3/8-16 Mount (Pre-Assembled)
1x Battery Holder
1x EC1 Gimbal Stabilizier
1x Instruction Manual
1x Micro USB AC Adapter
1x Quick Release Plate (Pre-Assembled)
1x Travel Case
1x Travel Case Strap
3x 18650 Batteries
1x 1/4"-20 Camera Screw (Pre-Assembled)

DGH
1x 1/4"-20 D-Ring Screw (Pre-Assembled)
1x Gimbal Crossbar
2x Gimbal Crossbar Feet
2x Rubber Grip Handles
1 x 3/8"-16 to 1/4"-20 Adapter (Pre-Assembled)
4 x 1/4"-20 Flat 5/32 Socket Cap Screws
1x 5/32 Hex Key

(IKA01483)


PRODUCT HIGHLIGHTS

  • Durable All Aluminum Construction
  • 360 Degree Movement from All Axis (Pitch, Yaw & Roll)
  • Works with DSLR's & Mirrorless Cameras between 2.0 to 4.5 lbs
  • Equipped with 3 Axis Gyro Stabilized Brushless Motors to Balance Most Mirrorless & DSLR Cameras
  • OLED Display Screen to show operating modes
  • Equipped with 32-Bit Controller & 12-Bit Encoder
  • Lithium Battery Powered- Low Maintenance, Eco-Friendly
  • Illuminated ON-OFF Switch/Battery Indicator 3/8"-16 Tripod Mount Socket

Ikan EC1 Beholder Gimbal for DSLRs & Mirrorless Cameras With Dual Grip Handles

Load Capacity    2 - 4.5 lb (0.9 - 2 kg)
Rotation Range  

  • Yaw: 360° 
  • Roll: 360° 
  • Pitch: 360°

Tripod Mount Thread    1 x 3/8"-16
Accessory Mount Thread    1 x 1/4"-20
Battery

  • 3 x 18650 model Li-ion batteries included (3.7 V) 
  • Approx. 8-10 hour operating time when used continuously 
  • Up to 20 hours operating time when switched between shooting and stand-by modes 
  • Approx. 3-4 hours charging time

Dimensions    14.2 x 7.24 x 3.1" (36.0 x 18.4 x 7.9 cm)
Weight    2.6 lb (1.2 kg)

SKU IKA01483
Brand Ikan
Unit Of Measure ea

Be The First To Review This Product!

Help other Camera Electronic users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category