PocketWizard MiniTT1 Radio Slave Transmitter For Canon E-TTL & E-TTL II



PRODUCT HIGHLIGHTS

  • On-Camera Hot Shoe
  • E-TTL & E-TTL II Compatible
  • 52 Channels Over 26 Frequencies
  • High-Speed Sync up to 1/8000th Sec.
  • Triggers all PocketWizards
  • USB Upgradeable

$363.00
In Stock

For Canon

$363.00
In Stock



Shipping options


The PocketWizard MiniTT1 Radio Slave Transmitter utilizes PocketWizard's new ControlTL firmware platform, is part of an ultra-versatile radio slave system, and is dedicated specifically to the Canon E-TTL II flash control system. It simply slides directly into the camera's hot shoe. There are no special settings to make or modes to call up. Use the camera, on-camera flash, or flash commander controls for flash compensation, zone and ratio control. It supports single or multiple dedicated flash units. The MiniTT1 is the ideal addition to any Canon E-TTL II flash system. It works in combination with the FlexTT5 Transceiver, and since this system works on digital radio technology, it can support E-TTL around corners, out-of-sight, or in bright sunlight.

2 Channel Settings + Learn Mode
Each setting can also be programmed to transmit any of 20 ControlTL channels for TTL photography and 32 standard channels for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch, Out of the box, the MiniTT1 is programmed for PocketWizard channels 1 and 2.

HyperSync & High-Speed Sync Technology
Enables X-sync speeds of up to 1/8000 with full-power flash. High-Speed Sync provides auto flash with the camera's shutter speed setting, up to 1/8000th. Unique programming optimizes HSS for better operation and more shots per set of batteries.

HyperSync & High-Speed Sync Technology
Supports flash sync speeds of up to 1/500th sec. High-Speed Sync auto syncs flash system with the camera's shutter speed setting, up to 1/8000th.

Built-in Hot Shoe, use with any flash
Features a hot shoe on the top, so that you can still mount a flash unit directly onto the camera. This allows you to combine your remote flash with the on-camera flash, or use the on-camera flash for additional E-TTL II control only. Hot shoe contacts automatically detect dedicated E-TTL or simple hot shoe flash.

Reverse Compatible & Basic Triggering
Operates on the same channels as all other PocketWizards to work with any unit you may already have. Basic Triggering mode enables standard use with virtually any hot-shoe camera.

Low-Profile Design
The MiniTT1 lies flat to stay out of the way and uses an internal antenna.

Configurable and Upgradeable
The MiniTT1 features a mini-USB port, which makes it upgradeable and "future-proof" for continuous improvements and compatibility upgrades. PocketWizard Utility software, available on www.pocketwizard.com enables setting custom functions, adjusting HyperSync timing and setting channels.

(22-PW-MINI-C-CE)


PRODUCT HIGHLIGHTS

  • On-Camera Hot Shoe
  • E-TTL & E-TTL II Compatible
  • 52 Channels Over 26 Frequencies
  • High-Speed Sync up to 1/8000th Sec.
  • Triggers all PocketWizards
  • USB Upgradeable

PocketWizard MiniTT1 Radio Slave Transmitter For Canon E-TTL & E-TTL II

Wireless

Channels 52
Wireless Range 30 to 1200' / 9.1 to 365.8 m
Radio Frequency 340 to 354 MHz

General

Control Modes TTL

Mounting

Top Mount Hot Shoe

Electrical

Battery Type 1 x CR2450, CR2354

Physical

Dimensions 2.8 x 1.9 x 1.3" / 7.1 x 4.9 x 3.3 cm (Transmitter)
Weight 2.3 oz / 65 g

Packaging Info

Package Weight 0.45 lb
Box Dimensions (LxWxH) 5.6 x 5.4 x 2.2"
SKU 22-PW-MINI-C-CE
Barcode # 893577001521
Brand PocketWizard
Unit Of Measure ea

Be The First To Review This Product!

Help other Camera Electronic users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category