Sirui HA-77 Horizontal Arm
Sirui HA-77 Horizontal Arm
Sirui HA-77 Horizontal Arm

Sirui HA-77 Horizontal Arm

SKU: 78184
$289.00
Tax included.
  • in stock Many in stock Out of stock You can purchase this product but it's out of stock
Available In-Store: Murray Street (Warehouse)

Payment Options

Close

Guaranteed Safe Checkout

24 Month Warranty
Fast Delivery Australia Wide
Best Price Guarantee

    The HA-77 Horizontal Arm from Sirui is a telescoping cross arm that can be combined with a tripod or stand to create a miniature camera boom. Its total 30.3 inch of length is provided by a two-section tube that rests on top of a tripod head, which features 360° of independent rotation. The tube and the head are connected by a fulcrum, which enables 90° of upwards or downwards tilt that can be locked into place. This allows an attached camera to be easily raised toward an elevated subject or over a scene. For subjects along the ground, the HA-77 Horizontal Arm can be used to obtain low angles while its user stands comfortably behind the camera.

    This horizontal arm has a load capacity of 11 lb and is compatible with tripods or support systems that feature a 3/8 inch-16 mount. Thumbscrew locks are positioned on the HA-77 Horizontal Arm's tripod head, fulcrum, and the clamp that holds its telescoping, two-section tube on the fulcrum. By loosening each of these thumbscrew locks, the tripod head can be swiveled, the fulcrum tilted, and the two-section tube pushed toward or pulled away from the subject. Additionally, a twist lock on the two-section tube allows for rapid deployment of its second section.

    To precisely position and extend the two-section tube, its first section features clearly visible hatch marks engraved at 0.5cm intervals from 0-30cm, the second section includes hatch marks along its length from 0-27cm that are also engraved at 0.5cm intervals, while the fulcrum's 90° upwards or downwards tilt can be set according to 10° intervals. For use as a miniature boom, the front end of the HA-77 Horizontal Arm on the two-section tube's second section includes a flat plate with a reversible mount that can accommodate a camera or tripod head with a 3/8 inch-16 or 1/4 inch-20 female accessory thread. At the rear end of the horizontal arm on the two-section tube's first section, a removable foam-padded handle with a ballast hook provides a secure and comfortable grip as well as the ability to counterbalance any items placed at the front of the horizontal arm.

    Alternatively, the HA-77 Horizontal Arm can be used to adapt multiple devices to a single tripod or stand. By obtaining a second flat plate with a reversible mount from Sirui that can be substituted for the foam-padded handle, a camera or tripod head can be placed on both sides of the horizontal arm. With a ball head on both sides of the HA-77 Horizontal Arm, a configuration of two parallel cameras, or a single camera that is parallel to a different device can be created. When the HA-77 Horizontal Arm is used with its foam-padded handle, a camera that is placed toward the end of two-section tube's reversible mount can be positioned perpendicular to the tripod or stand which the horizontal arm is attached to. The camera can then be extended past the tripod or stand's legs, which is particularly useful for copy stand or macro photography of subjects directly below the camera lens.

    • Telescoping cross arm with 11 lb load capacity that can be combined with a tripod or stand to create a miniature camera boom
    • Compatible with tripods or support systems that feature a 3/8 inch-16 mount
    • 19.7 to 30.3 inch of length provided by a two-section tube, which rests on top of a tripod head featuring 360° of independent rotation
    • Two-section tube and the head are connected by a fulcrum, which enables 90° of upwards or downwards tilt that can be locked into place
    • Individual thumbscrew locks allow tripod head to be swiveled, the fulcrum tilted, and the two-section tube pushed toward or pulled away from the subject
    • Twist lock on the two-section tube allows for rapid deployment of its second section
    • For precise positioning, first section of the two-section tube features clearly visible hatch marks engraved at 0.5cm intervals from 0-30cm, the second section of the tube includes hatch marks along its length from 0-27cm that are also engraved at 0.5cm intervals, and the fulcrum's 90° upwards or downwards tilt can be set according to 10° intervals
    • Front end on the two-section tube's second section includes a flat plate with a reversible, side-facing mount that can accommodate a camera or tripod head with a 3/8 inch-16 or 1/4 inch-20 female accessory thread
    • Removable foam-padded handle with a ballast hook provides a secure and comfortable grip as well the ability to counterbalance any items placed at the front of the horizontal arm
    • Foam-padded handle can be substituted with a second, flat plate with a reversible mount from Sirui
    • With a separately-available flat plate with reversible mount, a configuration of two parallel cameras, or a single camera that is parallel to a different device can be created
    • When foam-padded handle is in use, two-section tube and a camera at side-facing mount can be extended past the tripod or stand's legs, useful for copy stand or macro photography of subjects below the camera lens
    • 3/8 inch-16 mount on foam-padded handle allows it to be unscrewed from two-section tube and screwed into the tripod head's accessory head for storage and transport
    • Measures 14.6 x 5.3 inch when configured and folded for storage and transport
    • Durable, aluminum-alloy construction
    • Drawstring pouch for storage and transport
    • Hex key to remove or install tripod head or two-section tube's flat plate
    • Two hex keys to tighten fulcrum retaining screw
    • Ballast hook can be removed from foam-padded handle to be used as a hex key to remove or install tripod head or two-section tube's flat plate
    • Tip of 3/8 inch-16 mount of foam-padded handle can be used as a hex key to remove or install tripod head or two-section tube's flat plate

    Features

    Product Features

    • 19.7 to 30.3 inch Telescoping Cross Arm
    • Load Capacity: 11 lb
    • Mount Camera Perpendicular to Tripod
    • Use as Miniature Camera Boom
    Dimensions (W x H x D)
    19.7 x 7.9" to 30.3 x 7.9"in

    You might also like

    3 Legged Thing ALFIE L-Bracket for Select Sony Mirrorless Cameras (Copper)

    $249.00

    3 Legged Thing ALFIE L-Bracket for Select Sony Mirrorless Cameras (Darkness/Matte Black)

    $249.00

    3 Legged Thing Ellie-C Short Universal L-Bracket with Shorter Base (Copper Orange)

    $119.00

    3 Legged Thing Ellie-C Short with Peak Design Capture-Compatible Base (Copper Orange)

    $139.00

    3 Legged Thing Ellie-C Universal L-Bracket Copper (Orange)

    $129.00

    3 Legged Thing Ellie-C Universal L-Bracket with Peak Design Capture-Compatible Base (Copper Orange)

    $149.00

    3 Legged Thing Ellie-G Short Universal L-Bracket with Shorter Base (Metallic Slate Grey)

    $119.00

    3 Legged Thing Ellie-G Short with Peak Design Capture-Compatible Base (Metallic Slate Grey)

    $139.00

    3 Legged Thing Ellie-G Universal L-Bracket Metallic Slate (Grey)

    $129.00

    3 Legged Thing Ellie-G Universal L-Bracket with Peak Design Capture-Compatible Base (Metallic Slate Grey)

    $149.00

    3 Legged Thing Gracy L-Bracket for FUJIFILM GFX 100S and 50S II (Copper)

    $210.00

    3 Legged Thing Gracy L-Bracket for FUJIFILM GFX 100S and 50S II (Grey)

    $210.00

    3 Legged Thing Leo 2.0 Tripod Kit with AirHed Pro Lever Ball Head (Bronze and Blue)

    $659.00

    3 Legged Thing OLLIE L-Bracket for OM System OM-1 Mirrorless Camera (Copper)

    $229.00

    3 Legged Thing OLLIE L-Bracket for OM System OM-1 Mirrorless Camera (Darkness/Matte Black)

    $229.00

    3 Legged Thing QR11 L Bracket Copper - Standard

    $89.00

    3 Legged Thing QR11 L Bracket Grey - Standard

    $89.00

    3 Legged Thing Roxie-C L-Bracket for Canon EOS R5 and R6 (Copper)

    $169.00

    3 Legged Thing Toolz Multi-Tool

    $12.00

    3 Legged Thing Universal L-Bracket (Full Body) (Grey)

    $99.00

    3 Legged Thing ZELDA L Bracket for Nikon Z5, Z6, Z6II, Z7, Z7II (Copper)

    $169.00

    3 Legged Thing ZELDA L Bracket Grey Nikon Z6 & Z7

    $169.00

    A Field Guide to Native Orchid of South Western Australia

    $59.95$49.95

    Ace eBike Rear Cargo Rack

    $139.00

    Ampd Bros Ace S-Plus Electric Bike (Ice White)

    $3,790.00

    Ampd Bros Ace S-Plus Electric Bike (Matte Black)

    $3,790.00

    Acuter Masky 60mm Educational Telescope Kit - Muksutov

    $199.00

    Acuter Newtony 50 Educational Telescope Kit - Newtonian

    $99.95

    Adox Neutol Eco Paper Developer (500mL)

    $28.00

    AgfaPhoto LeBox Flash 35mm Disposable Camera

    $28.50

    AgfaPhoto Reusable 35mm Camera (Black)

    $69.00

    AgfaPhoto Reusable 35mm Camera (Coffee)

    $69.00

    AgfaPhoto Reusable 35mm Camera (Red)

    $69.00

    Aputure Amaran P60c RGBWW LED Panel 3-Light Kit

    $1,765.00

    Angelbird 128GB AV Pro Mk 2 UHS-II SDXC Memory Card

    $359.00

    Angelbird 1TB AV Pro CFexpress 2.0 Type A Memory Card

    $989.00

    Angelbird 256GB AV Pro Mk 2 UHS-II SDXC Memory Card

    $739.00

    Angelbird 256GB AV Pro MK2 UHS-II SDXC Memory Card

    $249.00

    Angelbird 256GB AV Pro UHS-II microSDXC Memory Card with SD Adapter

    $225.00

    Angelbird 512GB AV Pro CF CFast 2.0 Memory Card

    $889.00

    Angelbird 512GB AV PRO CFexpress 2.0 Type B SE Memory Card

    $275.00

    Angelbird 512GB Match Pack for the Blackmagic Design URSA Mini (2 pcsx 256GB)

    $1,699.00

    Angelbird 64GB AV Pro Mk 2 UHS-II SDXC Memory Card Single

    $179.00

    Fast Delivery Australia Wide

    Excellent Customer Support

    Safe & Secure Online Payment

    Quality Assured Products

    BACK TO TOP
    x