Sunwayfoto MFR-150S Macro Focusing Rail (Screw Release)

SKU: 73287



PRODUCT HIGHLIGHTS

  • Arca-Type Compatible Dovetail Mount
  • Weight Capacity: 15.4 lb
  • Screw-Knob Clamp
  • Ratchet Handle and Thumb-Screw Knob
  • Precise Fore-or-Aft Adjustment
  • CNC Machined T6061 Aluminum
  • Type III Black Anodized
  • Two Built-In Safety Stop Screws
  • Engraved Index Marks
  • Stackable for Dual-Axis Adjustment

Shipping options


$160.70

WAS $189 SAVE $28.30

Sale Until 11:59 PM 01/12/20


The Macro Focusing Rail with Screw-Knob Clamp from Sunwayfoto gives you the ability to precisely adjust your camera fore-or-aft when shooting macro photography. The clamp at the top is Arca-type compatible and locks down with a screw-knob. The focusing rail itself has a double-dovetail mount and will fit most Arca-type clamps on the market.

The Macro Focusing rail has both a ratchet handle, for fast and quick adjustments, and a thumb-screw knob along with engraved index marks on the side of the rail for fine adjustments. The CNC machined T6061 aluminum rail holds a maximum weight capacity of 15.4 lb, but may hold less weight once the angle of the rail is changed.

The Type III black anodized aluminum is scuff and scratch resistant and the finish is also resistant against corrosion. In addition, two focusing rails can be stacked for dual axis adjustments (fore-or-aft and lateral). Located on the bottom of the plate are two safety stop screws to prevent any accidental pulling or falling out of the rail when a clamp is partially open.

  • Arca-type compatible dovetail mount and screw-knob clamp
  • Thumb-screw knob for precise fore-or-aft adjustments
  • Ratchet handle for quick and fast adjustments
  • Type III black anodized aluminum, which is resistant against scratches, scuffs, and corrosion
  • CNC machined T6061 aluminum rail with two built-in safety stop screws and engraved index marks

(73287)


PRODUCT HIGHLIGHTS

  • Arca-Type Compatible Dovetail Mount
  • Weight Capacity: 15.4 lb
  • Screw-Knob Clamp
  • Ratchet Handle and Thumb-Screw Knob
  • Precise Fore-or-Aft Adjustment
  • CNC Machined T6061 Aluminum
  • Type III Black Anodized
  • Two Built-In Safety Stop Screws
  • Engraved Index Marks
  • Stackable for Dual-Axis Adjustment

Sunway Foto  Macro Focusing Rail with Screw-Knob Clamp

Material of Construction CNC machined T6061 aluminum
Finish Type III black anodized
Adjustment Range
  • Lead screw: 4.2" (106 mm)
  • Total Adjustment Range: 8.7" (220 mm)
  • Stage Travel per Revolution: 0.05" (0.125 mm)
Thread Pitch 0.5 mm (12.5 mm)
Weight Capacity 15.4 lb (7 kg) weight capacity varies with angle of load
Dimensions 8.5 x 2.1 x 1.3" (21.6 x 5.3 x 3.3 cm)
Weight 9.8 oz (279 g)

Packaging Info

Package Weight 0.95 lb
Box Dimensions (LxWxH) 12.6 x 4.1 x 2.3"
SKU 73287
Barcode # 6952512509486
Brand Sunwayfoto
Shipping Weight 0.4309kg
Shipping Width 0.104m
Shipping Height 0.058m
Shipping Length 0.320m
Unit Of Measure ea
Type New

Be The First To Review This Product!

Help other Camera Electronic users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category