Syrp Genie Motion Control Time-Lapse Device

The Genie Motion Control Time-Lapse Device from Syrp is your key to the creative world of time-lapse photography or real-time video. The 4 inch cube takes up very little space in your bag, and at only 3.3 lb it's easy to make it part of your standard rig.

The Genie, which allows both panning and linear motion control, attaches to standard gear such as dollies, sliders, jib arms, and tripods. Simply attach it to your tripod or support and mount your optional camera and ball head to the 3/8 inch-16 stud atop the Genie. The weight of your equipment is rarely a concern since it supports up to 44 lb. An illuminated bubble level is built-in for setting up in low light. The Genie has factory presets such as Stars, People, or Clouds, but you can enter an unlimited amount of user presets into the Genie's memory for custom work. At maximum panning speed, a 360° pan takes five seconds, while 39 inch of linear movement takes just 23 seconds.

Linear time-lapse can be done on a rail or on a linear support system of your own making. While the Genie comes with 9.8' of rope to pull it across the rail, the movement of your time-lapse is only limited by the length of your rope. Kevlar-cored rope with lengths of 328', 164', or 32.8' are available separately. The Genie has been tested successfully on a homemade 60' dual-cable stretched over a lake.

Inputs include both USB for firmware and a sensor input. The free firmware upgrade enables bulb ramp-in and ramp-out functions, as well as HDR (High Dynamic Range). Ramping is the process of modifying exposure settings on a camera to maintain a desired exposure value while the camera is in Bulb mode. This is especially valuable for transitional day into night, or night into day time-lapses.

The sensor input accepts a motion, light, sound, or other type of sensor to start your program in response to specific stimuli. The Genie ships with both panning and sliding bases, two slider mounts, 9.8' of rope, and a multi-voltage charger for its built-in battery. A three-hour charge gives you about 12 hours of run time, depend on the weight of your camera. The Genie is compatible with approximately 130 cameras from nine major brands. A camera link cable must be purchased separately.

Dual Motion
Panning and linear motion control with one device.

Versatile
Attaches to any existing film equipment such as a dolly, slider, jib arm, etc.

Sensor Input
Auto Start function through a timer or sensor or both. Sensor input allows for attachment of a motion sensor, light sensor, sound sensor, and more.

Preview
The Preview function allows for revision of recording movement prior to recording.

Pre-Sets
Factory pre-sets allow for instant shooting straight out of the box, or storable user-programmable panning and tracking pre-sets.

Auto Start and Power Saving
Auto Start enables the user to program camera movements to return to "Home" and repeat again, or continuously run the same movement. It also enables the user to set up time-lapse or camera movement to start on a delay timer. Auto Power Off shuts down the Genie when it's unused for one hour to save battery power.

Leveling
Bubble level with light is provided.

Ramping Firmware
Bulb ramping is the process of modifying exposure settings on a camera to maintain a desired exposure value while the camera is in Bulb mode. A free firmware upgrade allows for ramp-in/ramp-out function and HDR.

Compatibility
If your camera is not listed below, please contact Syrp to check compatibility.

Canon
7D, 70D, 60D, 50D, 40D, 30D, 5D, 20D, 10D, 5D Mark IV, 5D Mark III, 5D Mark II, 1D X, 1D C, 1D Mark IV, EOS M, EOS M2
1D (s) Mark III, 1D (s) Mark II (N), 1200D (T5), 1100D (T3), 1000D (XS), 100D (SL1), 700D (T5i), 650D (T4i)
600D (T3i), 550D (T2i), 500D (T1i),450D (XSi), 400D (XTi), 350D (XT), 300D, 300V, 300, 60Da
50E, 50, 33, 30, 3000, PowerShot G1X Mark II, G1X, G10, G11, G12, G15

Nikon
D810, D800E, D800, D700, D600, D300S, D300, D200, D4, D4S, D3S, D3X, D3, D2, D1X, D1, D1H, D2H, D2HS, D2X, D2XS, D80, D70s, D7100, D7000, D5300, D5200,
D5100, D5000, D3200, D3100, D3000, D90, D610, 1 AW1, 1 J1, 1 J2, 1 J3, 1 J4, 1 S1, 1 S2, 1 V1, 1 V2, 1 V3

Sony
A99, A 77 Mark II, A77V, A900, A850, A700, A580, A550, A500, A450, A350, A300, A200, A100, A77, A65, A58, A55, A35, A33, NEX 5, NEX 5N NEX 5T, NEX 7, NEX 6, Sony a7, a7R, a7s, a6000

Pentax
645D, ist D, ist DL, ist DL2, ist DS, ist DS2, K-30, K-5, K-5 II, K-5 IIs, K3, K-50, K-500, K-7, K-m, K10 Grand Prix, K100D, K100D Super, K10D, K110D, K200D, K20D, MZ-6, MZ-L, ZX-L

Panasonic
FT 2, FZ1000, FZ100, FZ15, FZ150, FZ20, FZ200, FZ30, FZ50, G1, G10, G2, G3, GH4, G5, G6, GF1, GH1, GH2, GH3, GX1, GX7 L1, L10, LC1, TS2

Olympus
E-100 RS, E-30, E-400, E-410, E-420, E-450, E-510, E-520, E-600, E-620, Evolt E-410, Evolt E-510, OM-D E-M1, OM-D E-M10, OM-D E-M5, PEN E-P1, PEN E-P2, PEN E-P3, PEN E-P5, PEN E-PL2, PEN E-PL3, PEN E-PL5, PEN E-PM1, PEN E-PM2, SP-550, SP-560, SP-570, XZ-1, XZ-2, XZ-2 iHS

Fujifilm
S5 Pro, S3 Pro, X-E1

Kodak
DSC-530, DCS Pro 14n

Contax
N Digital NX, N1, 645

Samsung
GX 1L, GX 1S, GX-10, GX-20, NX-10, NX-100, NX-11, NX-5

Hasselblad
H, H3D, H4D-200MS, H4D-31, H4D-40, H4D-50, H4D-50MS, H4D-60

Sigma
SD1, SD1 Merrill, SD15

Minolta
DiMAGE 5, DiMAGE 7, DiMAGE 7Hi, DiMAGE 7i, DiMAGE A1, DiMAGE A2, DiMAGE A200, Dynax 3, Dynax 4, Dynax 5000, Dynax 500si, Dynax 505si, Dynax 5D, Dynax 7, Dynax 7000, Dynax 7D, Dynax 9, Dynax 9000, Dynax Sweets, Maxxum 3, Maxxum 4, Maxxum 5000, Maxxum 500s, Maxxum 505si, Maxxum 5D, Maxxum 600si, Maxxum 7, Maxxum 7000, Maxxum 700si, Maxxum 7D, Maxxum 807si, Maxxum 9, Maxxum 9000

Leica
DigiLux 2, DigiLux 3, V-Lux, V-Lux 2, V-Lux 3