The Manfrotto 030-38 Hexagonal Quick Release Plate with 3/8 inch Screw is a standard-type hexagonal quick release plate for the RC0 hexagonal quick release system. It comes with a 3/8 inch camera...
The Manfrotto 030ARCH-14 Architectural Quick Release Plate is a plate for the RC0 hexagonal system that features a anti-twist edge. This makes it ideal for architectural photography. It assures perfect...
This is a single Manfrotto Autopole. These single action locking cam Autopoles mount between the floor and ceiling of a studio. If the studio ceiling is higher than 12.2 feet (3.7...
This is a single Manfrotto Black Autopole. This single action locking cam Autopole mounts between the floor and ceiling of a studio. If the studio ceiling is higher than 12.2...
This single Manfrotto Autopole Black Base is designed to support one Autopole, when either the ceiling is higher than 12 feet (3.6 m) or when you want your backgrounds to be...
This is a Set of four Autopole Foot Covers. The foot of a Manfrotto Autopole is made of black rubber, which might cause "skid marks" on light-coloured floors. This is...
The black Single Extension for Autopole from Manfrotto can extend the height of one Autopole by 59 inch. It can also be used as a background crossbar with the Super...
The Manfrotto 035B Super Clamp is made of lightweight cast alloy. The Super Clamp is a very versatile tool and it holds just about anything: cameras, lights, umbrellas, hooks, shelves,...
The Manfrotto 036-14 Standard Stud features a standard 1/4in-20 screw on one end, and snaps into a Super Clamp socket on the other end. Use it to mount cameras, directly...
The Mafrotto 036-38 Standard Stud with 3/8in Screw snaps into a Super Clamp socket. It has a 3/8in screw thread at its other end. Use it directly with equipment that features a...
The Manfrotto 037 Reversible Short Stud is a short stud made from brass that fits into the Super Clamp. It features a 3/8 inch screw at one end and a...
The Manfrotto 038 Double Super Clamp is a unit of two Super Clamps made of lightweight cast alloy, fastened together at a 90° angle. Clamps on tubes: 1/2 to 2-1/8...
The Manfrotto 039 U-Hook Cross Bar Holders is a set of two U-hooks that plug into a Super Clamp socket. Ideal for cross poles when used to support background paper.
The Manfrotto 043 Sky Hook Adjustable Gaffer Clamp is a lightweight gaffer clamp, with adjustable jaws to handle tubes from 1 inch to 2-1/2 inch. Features one fixed 5/8 inch stud, and...
This is a Manfrotto 044 Background Holder hook that will support up to 3 background crossbars or Expan Drives, when mounted onto the Manfrotto AutoPoles. It consists of two 2921...
The Manfrotto 045 Background Triple Hooks For Three Backgrounds is a set of two background paper holders that holds three Bogen Expan 046 drive units. The Triple Hook can be...
This Manfrotto 045-6 Background Holder Hooks is a set of 2 background holder hooks that support up to 6 backgrounds, when they are used with the Expan Drive system. This...
The Manfrotto Expan Set with Metal Grey Chain provides a reliable solution for managing background paper rolls in a professional studio setting. This essential background drive system allows for quick...
The Manfrotto 046MCB Expan Drive Set with Black Metal Chain allows easy raising and lowering of rolls of background paper without lowering the support stands. The system uses two expandable...
The Manfrotto MT055CXPRO4 Carbon Fiber Tripod is a 4-section support that replaces the 055CXPRO4 tripod. It has a load capacity of 19.8 lb and extends from 3.5 inch to 66.9...
The Manfrotto 055CXPRO3 Carbon Fiber Tripod is a 3-section support that replaces the 055CXPRO3 tripod. It has a load capacity of 19.8 lb and extends from 3.5inch to 66.9inch. Its...
The Manfrotto MT055XPRO3 is a professional aluminium tripod designed for photographers and videographers who require maximum stability and versatility. Its innovative 90 degree centre column mechanism allows for rapid switching...
The 056 3-Way, Pan-and-Tilt Head from Manfrotto has a load capacity of 11 lb and can be attached to tripods or other support systems that feature a 3/8 inch-16 mount....
The Manfrotto 057 Carbon Fibre Tripod with Rapid Column is a heavy-duty tripod that's intended for use with video cameras and large still cameras. With a 44.1 lb load capacity,...
The Manfrotto 057 3-Section Carbon Fiber Tripod w/ Rapid Center Column is a heavy-duty tripod that's intended for use with video cameras and large still cameras. With a 39.7 lb...
The Manfrotto 058B Aluminium Triaut Tripod is a professional tripod ideal for use with medium format and 4x5 inch cameras. It features a built-in bubble level, and automatic leg release system...
The Manfrotto 059 Set of Two Background Hooks will fit the Bogen 035 Super Clamps, and are designed to work with the Expan Drive System (046). They are constructed of...
This Manfrotto 059WM Single Background Hook Set is a set of 2 heavy duty background holder hooks that support 1 background, when they are used with the Expan Drive system...
The Manfrotto 061 Joining Stud permits two Manfrotto, Avenger, Matthews or Impact Super Clamps to be joined with their jaws at six different locking positions to each other.
The Manfrotto 061RA Right Angle Joining Stud joins two Super Clamps together, and sets the jaws at 90° angles to each other. Useful for making frames or mounting heavy duty...
The Manfrotto 066 Double Female Stud is a double ended 5/8 inch diameter stud that has a 1/4 inch-20 female thread on one side, and a 3/8 inch female thread on the...
The sections of the Manfrotto 085BS Heavy-Duty Boom and Stand may be used individually, or with all the sections fitted and locked together. This stand has a black-painted steel construction,...
Diameter 35mm. 3 section boom arm complete with Pivoting Clamp 123, Counter Weight 022, cable clips and locking key. Load: 6kg at maximum extension (250cm) with 7kg of counter weight....
The Manfrotto 088 Female 1/4inch-20 to Male 3/8 inches Thread Adapter is for use with light stands or tripods that have a top screw of 1/4inch-20, when the lighting fixture...
This Manfrotto 088LBP Adapter is a 1/4inch-20 to 3/8inch adapter, with flange. It is also known as a reducing bushing; it is for use with light stands or tripods that...
The Manfrotto 093 Cable Clip, Large (Set of Four) (Black) are made to keep light cables gathered to the light stand. For light stand riser diameters from 28-40mm. Package of...
This is the Manfrotto 098B Wall Mounted Black Boom Arm. Unlike the Auto Boom, which may be attached to a wall or a stand, this boom arm must be attached...
The 12' Manfrotto Alu Master Air-Cushioned Stand is a lightweight support with an impressive load capacity. A clever design feature called QSS (Quick Stack System) allows the stand to fold...
This is a Manfrotto Alu Master Air Cushioned Light Stand Quick Stack 3-Pack . Each stand in this set is a 4 section, 3 riser aluminum light stand with a...
The Manfrotto Alu Ranker Air-Cushioned Light Stand is a black anodised aluminum stand that rises to a maximum of 9'. This stand is an updated version of the older "Stacker"...
This is the black, 7' Manfrotto Alu Mini Compact Air-Cushioned Stand Quick Stack 3-Pack. With a patented Quick Stack System (QSS), ease of transport is optimised. Connecting the stands together...
The Manfrotto 102 Heavy Duty Tripod Carrying Strap (Gray) is a basic but convenient way to carry a tripod. It has a spring clip that fastens quickly to the steel...
This is a Manfrotto Alu Air-Cushioned Compact Light Stand. It rises to a maximum height of 7.7' (2.3 m). Formerly known as a "Stacker", this stand now has what is called...
This is a Manfrotto Alu Air-Cushioned Compact Stand Quick Stack 3-Pack. Each stand rises to a maximum height of 7.75 feet (2.3 m), and is air cushioned. Formerly known as a...
The Manfrotto 109 Caster Set is comprised of 3 casters which fit on light stands with a leg diameter of 22mm such as the Manfrotto 367B, 366B and 368B. The...
The Manfrotto 110 Braked Caster Set is a set of 3 75mm diameter braked wheels with adapter for any light stand legs that are 22mm in diameter. They slip onto...
The Manfrotto 110G Braked Caster Set features 3 wheels, each with a diameter of 100mm, with an adapter for any light stand legs that have a diameter of 22mm. They...
The Manfrotto 111BSU Tall Steel Cine Stand has three sections, two risers and a levelling leg. This extendable, locking leg aids in stabilising the load of a light fixture or...
The Manfrotto 114MV Cine/Video Dolly is designed for use with tripods with spiked feet. The 5" wheels with independent brakes, cable guards, and unique leg locking system make this dolly...
This is a Manfrotto 118 Universal Short Spigot with Double Male Thread. It fits the (2905) Swivel Umbrella Adapter. 5/8 inch diameter with 1/4-20 and 3/8 inch threaded tip.This part...
The Manfrotto 119 Short Adapter Spigot is a 16mm long universal adapter spigot that features a 1/4 inch-20 female thread at one end and a 3/8 inch female thread at...
This is a Manfrotto Extension Pole for the base of the Backlight Stand. Use this two section black aluminum pole to raise almost any small lighting fixture from 21 to...
The Manfrotto 123 Pivoting Boom Clamp is a pivoting clamp for use with all Super Booms and Heavy Duty Booms. Pivoting clamp for 35mm diameter boom shafts. 1-1/8" male, and...
This is a Manfrotto Chrome Plated Steel Stand with Leveling Leg. It rises to a maximum height of 10.9' (3.3 m). It has three sections and two risers. It accepts...
The Manfrotto 127 Basic Video Dolly features a 22 lb load capacity and supports all tripods with a 20 inch radius (as long as the overall weight of the tripod,...
The Manfrotto 127VS is the variable leg portable dolly. This dolly has a special feature that allows adjustment of the radius from a maximum of 44.9 inch to as little...
The 128RC QR Micro Fluid Head from Manfrotto is ideal for a VCR camera up to 8.75 lbs. It includes a quick release plate. The head mounting thread is 3/8...
