The Manfrotto 438 Compact Leveling Head provides fast leveling for tripods without built-in levels. It fits between the center column and head and has 10° range of adjustment.This item replaces...
The Manfrotto 430 Long Plate Double Camera Support Platform is an 11 inch long camera support plate, that allows for two cameras to be mounted at the same time on...
The Manfrotto Double Articulated Arm has three adjustable sections. The 396 Series of arms is more rigid that the 196 range to support heavier loads -- up to 11 lbs....
The Manfrotto 359 Long Lens Support is designed to provide extra support when using long telephoto lenses. By supporting the camera base with the legs of the tripod, this device...
The Manfrotto 357 Pro Video Quick Release Plate is extra long to facilitate perfect balance for superior camera handling when using heavy lenses or oversized batteries with the 3274 (316),...
The Manfrotto Variable Friction Magic Arm with Quick Release is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. Its camera platform...
The Manfrotto 244MINI Friction Arm is a versatile 9.45in support arm with 1/4in-20 male thread attachments on both ends and an included 3/8in-16 adapter. Its attachments are tightly secured with the...
Have everything you need to mount an off-camera flash or accessory to a tripod, stand, or bar with the Manfrotto 244 Micro Friction Arm Kit. Both ends of the friction...
The Manfrotto 244 Variable Friction Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The knob allows partial loosening...
This Manfrotto 237HD Heavy Duty Flex Arm is 18mm in diameter, wider than the standard Flex Arm. Otherwise, it shares the identical feature set: 21.1 inch (55 cm) in length...
This is a Manfrotto 237 Flexible Arm 1/2 inch diameter, 20.5 inch gooseneck with 5/8 inch stud for exact positioning of small gobos, reflectors, props, or flash heads. Hex end...
The Manfrotto 200PL-Pro Aluminum Plate is RC2 and Arca-type compatible. It can be used with cameras with a 1/4 inch-20 tripod thread and comes with a 3/8 inch-16 screw adapter for...
The Manfrotto 200PL Quick Release Plate with 1/4 inch-20 Screw and 3/8 inch Bushing Adapter is the replacement quick release plate for all heads that use the RC2 (3157N) system....
The Manfrotto 186 Female Threaded 3/8inches to Male 5/8inches Stud Adapter is a 50mm long stud adapter that has a threaded 3/8 inch female socket at the bottom, and a...
The Manfrotto 158 Adapter converts a 5/8 inch (16mm) light stands top to a 5/8 inch female socket. Use it to connect two units with 16 mm spigots, or to...
This is a set of five reducing bushings from Manfrotto, used to mount any accessory with a female 3/8 inch-16 threaded socket onto a 1/4 inch-20 male screw.
The Manfrotto 143A Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The lever tightens and locks for precise...
The Manfrotto 131DD Tripod Accessory Arm for Four Heads mounts onto the center column of tripods with 3/8 inch threads. The platforms feature 3/8 inch screws, which allows a standard...
With background paper or cloth for a photo, you need a secure way to hold it--the Manfrotto Background Support System will handle it. Two light stands that extend up to...
The Manfrotto 127 Basic Video Dolly features a 22 lb load capacity and supports all tripods with a 20 inch radius (as long as the overall weight of the tripod,...
The Manfrotto 119 Short Adapter Spigot is a 16mm long universal adapter spigot that features a 1/4 inch-20 female thread at one end and a 3/8 inch female thread at...
This is a Manfrotto 118 Universal Short Spigot with Double Male Thread. It fits the (2905) Swivel Umbrella Adapter. 5/8 inch diameter with 1/4-20 and 3/8 inch threaded tip.This part...
This is a Manfrotto Alu Air-Cushioned Compact Light Stand. It rises to a maximum height of 7.7' (2.3 m). Formerly known as a "Stacker", this stand now has what is called...
The Manfrotto Alu Ranker Air-Cushioned Light Stand is a black anodised aluminum stand that rises to a maximum of 9'. This stand is an updated version of the older "Stacker"...
The Manfrotto 088 Female 1/4inch-20 to Male 3/8 inches Thread Adapter is for use with light stands or tripods that have a top screw of 1/4inch-20, when the lighting fixture...
The Manfrotto Wind-Up Stand is a 12 ft tall chrome-plated steel stand with geared column and one levelling leg. Rugged and heavy duty, it combines the strength, stability and portability...
The sections of the Manfrotto 085BS Heavy-Duty Boom and Stand may be used individually, or with all the sections fitted and locked together. This stand has a black-painted steel construction,...
The Manfrotto 045 Background Triple Hooks For Three Backgrounds is a set of two background paper holders that holds three Bogen Expan 046 drive units. The Triple Hook can be...
This is a Manfrotto 044 Background Holder hook that will support up to 3 background crossbars or Expan Drives, when mounted onto the Manfrotto AutoPoles. It consists of two 2921...
The Manfrotto 038 Double Super Clamp is a unit of two Super Clamps made of lightweight cast alloy, fastened together at a 90° angle. Clamps on tubes: 1/2 to 2-1/8...
The Manfrotto 037 Reversible Short Stud is a short stud made from brass that fits into the Super Clamp. It features a 3/8 inch screw at one end and a...
The Mafrotto 036-38 Standard Stud with 3/8in Screw snaps into a Super Clamp socket. It has a 3/8in screw thread at its other end. Use it directly with equipment that features a...
The Manfrotto 036-14 Standard Stud features a standard 1/4in-20 screw on one end, and snaps into a Super Clamp socket on the other end. Use it to mount cameras, directly...
The Manfrotto 024B Boom Assembly is comprised of three sections, extends to ~6.5' (2.1 m) and can easily be disassembled to 28 inch (71cm) for storage or transport. The black...
The Manfrotto 015 Female 3/8in to Male 1/4in-20 Adapter reduces a 3/8in threaded screw to a standard 1/4in-20 tip. This item replaces old catalog #3358.
The Manfrotto 014-38 Rapid Adapter is a locking adapter that fits any light stand with a 5/8inches top stud and will allow vertical or horizontal mounting of a light fixture,...
This is a black 33.5in Manfrotto Backlight Stand with Pole. Mount a lighting fixture close to the floor, or table with this back light stand. This stand consists of a steel...
The Manfrotto 155BKL Double Ball Joint without Camera Platform increases the possibility of angle to what you have attached it to. It is super clamped compatible and very sturdy. The...
Designed for the urban or street photographer, this medium dark gray Chicago Backpack 50 from Manfrotto is a sleek bag with dual-side access to your camera and gear. It holds...
Designed for the urban or street photographer, this small dark gray Chicago Backpack 30 from Manfrotto is a sleek bag with dual-side access to your camera and gear. It holds...
The Manfrotto 127VS is the variable leg portable dolly. This dolly has a special feature that allows adjustment of the radius from a maximum of 44.9 inch to as little...
The Manfrotto 612 Nitrotech is a flat base fluid video head designed for the versatility needs of the independent content creator who's engaged in different types of projects. Thanks to...
The Manfrotto 608 Nitrotech is a flat base fluid video head designed for the versatility needs of the independent content creator who's engaged in different types of projects. Thanks to...
The Manfrotto 502HD Pro Video Head with Flat Base is an affordable yet remarkably full-featured professional head that represents an advance over the popular 501HDV, with sturdier construction and featuring...
The Manfrotto Pro Video Head (MVH502A) with 75mm Half-Ball is an affordable yet remarkably full-featured professional head that represents an advance over the popular 501HDV, with sturdier construction and a...
The MVH500AH Fluid Video Head with Flat Base from Manfrotto is designed with a wide platform, optimal for HDSLR camera bodies. Smooth and precise, it has a maximum weight load...
The Manfrotto MVH500A Fluid Drag Video Head features a fluid head with a wide platform to support the HDSLR form factor, and a 60mm half ball for quick leveling without...
The smallest and most lightweight video head in the Manfrotto range. The Befree Live Fluid Head has a dedicated sliding plate to balance the latest camcorders, DSLRs or mirrorless cameras...
The Manfrotto MSQ6 Quick Release Adapter with Plate is a replacement or upgrade part that allows you to fit any existing 050 or 468 series Manfrotto tripod head with the...
Manfrotto's Q2 L Bracket provides a quick, easy, and precise way to change your camera position from a horizontal to a vertical orientation. The lightweight magnesium alloy bracket features anti-rotational...
Accurately adjust your camera position with the MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System from Manfrotto. Able to hold up to 22 lb, the 1.1 lb ball head is...
Precisely control your camera's orientation with the XPRO Geared 3-Way Pan/Tilt Head from Manfrotto. The XPRO can hold up to 8.8 lb while weighing only 1.7 lb. It is made...
The MHXPRO-3W 3-Way Pan/Tilt Head from Manfrotto is a compact pan/tilt head with retractable handles that can be extended as needed. Two knobs control the friction for the front-to-back and...
The Manfrotto MHXPRO-2W is a standard 2-way pan/tilt head with the added feature of dual fluidity levels. This means you can choose between hard and soft fluidity when tilting your...
The MH804-3W 3-Way Pan/Tilt Head from Manfrotto replaces and improves upon the design of the 804RC2. This head incorporates retractable handles which decreases the overall size when not in use....
This Manfrotto 496 Center Ball Head features an integrated RC2 quick release cam lock and a 200PL-PRO Quick Release Plate. Compatible quick release plates can be removed from the head...
This Manfrotto 494 Center Ball Head features an integrated RC2 quick release cam lock and a 200PL-PRO Quick Release Plate. Compatible quick release plates can be removed from the head...
The Manfrotto 700RC2 compact video head is designed to support compact camcorders as well as still cameras with medium and long telephoto lenses. It includes a fixed length pan arm...
The Manfrotto 520BALL 75mm Half Ball is designed to facilitate quick leveling of a 75mm ball head with the 3283 tripod, and has a 3/8 inch-16 threaded screw. It can...
The Manfrotto 509PLONG Quick-Release Plate for 509HD Head is an extra-long (5.5 inch) plate for a video camera. It's compatible with the 509HD head as well as other newer Manfrotto...
The Manfrotto 509HD Professional Video Head supports professional video camera systems weighing up to 29 lb (13.1 kg). A 4-step counterbalance mechanism ensures optimum balance and helps for quick setup....
The Manfrotto 504PLONG Quick Release Mounting Plate is the long version of the standard camera plate for the Manfrotto 504HD fluid head. The extra length helps balance cameras with unusual...
The Manfrotto 501PL Quick-Release Plate is a 3.38 inch long sliding quick-release plate compatible with heads that use the RC5 quick-release system. It comes supplied with one 1/4 inch-20 screw...
