The grey card EzyBalance 18% is a handy double sided 'pop up' grey/white card which simplifies the complex technical issues surrounding exposure and colour correction when working in different lighting conditions.A Unique...
This Manfrotto Cine Stand has a black anodised finish. It has two sections and one riser. Quick Set UpSets up easily in the matter of secondsTwo Finishes AvailableEither a silver...
This brass Manfrotto 013 Double-ended Spigot is compatible with a variety of stands and grip gear including the 2940, 2941, 3077, 308, and 3095. It has a 5/8 inch (16...
The Manfrotto 014-14 Rapid Adaptor is a locking adaptor that fits any light stand with a 5/8 inch top stud, and will allow vertical or horizontal mounting of a light fixture,...
The Manfrotto 014-38 Rapid Adapter is a locking adapter that fits any light stand with a 5/8inches top stud and will allow vertical or horizontal mounting of a light fixture,...
The Manfrotto 015 Female 3/8in to Male 1/4in-20 Adapter reduces a 3/8in threaded screw to a standard 1/4in-20 tip. This item replaces old catalog #3358.
Made of zinc steel material, the Manfrotto 016 Broncolor Adaptor slips over and locks onto a standard 5/8 inch stud. The entire adaptor is 3.9 inch long, and ends in a 1/4...
The Manfrotto 022 Counter Balance Weight is a 15 lb painted iron counter balance weight for use with 90417 yoke assembly, or any heavy duty boom or light stand.
The Manfrotto 024B Boom Assembly is comprised of three sections, extends to ~6.5' (2.1 m) and can easily be disassembled to 28 inch (71cm) for storage or transport. The black...
The Manfrotto 025BS Super Boom features coaxial geared controls at the end of the boom, which permits movement of 180°.The 008BU (a.k.a 3071B) two section stand has black painted aluminum...
The Manfrotto Black Super Boom features coaxial geared controls at the end of the boom, which permits movement a full 180°. It extends to 8.8 feet (2.7 m). Dual cranks provide...
The Manfrotto 030-14 Hexagonal Quick Release Plate with 1/4"-20 Screw is the standard hexagonal quick release plate for the RC0 hexagonal quick release system. It comes with a 1/4"-20 camera...
The Manfrotto 030-38 Hexagonal Quick Release Plate with 3/8 inch Screw is a standard-type hexagonal quick release plate for the RC0 hexagonal quick release system. It comes with a 3/8 inch camera...
The Manfrotto 030ARCH-14 Architectural Quick Release Plate is a plate for the RC0 hexagonal system that features a anti-twist edge. This makes it ideal for architectural photography. It assures perfect...
This is a single Manfrotto Autopole. These single action locking cam Autopoles mount between the floor and ceiling of a studio. If the studio ceiling is higher than 12.2 feet (3.7...
This is a single Manfrotto Black Autopole. This single action locking cam Autopole mounts between the floor and ceiling of a studio. If the studio ceiling is higher than 12.2...
This single Manfrotto Autopole Black Base is designed to support one Autopole, when either the ceiling is higher than 12 feet (3.6 m) or when you want your backgrounds to be...
This is a Set of four Autopole Foot Covers. The foot of a Manfrotto Autopole is made of black rubber, which might cause "skid marks" on light-coloured floors. This is...
The black Single Extension for Autopole from Manfrotto can extend the height of one Autopole by 59 inch. It can also be used as a background crossbar with the Super...
The Manfrotto 2915 Super Clamp is made of lightweight cast alloy. The Super Clamp is a very versatile tool and it holds just about anything: cameras, lights, umbrellas, hooks, shelves,...
The Manfrotto 036-14 Standard Stud features a standard 1/4in-20 screw on one end, and snaps into a Super Clamp socket on the other end. Use it to mount cameras, directly...
The Mafrotto 036-38 Standard Stud with 3/8in Screw snaps into a Super Clamp socket. It has a 3/8in screw thread at its other end. Use it directly with equipment that features a...
The Manfrotto 037 Reversible Short Stud is a short stud made from brass that fits into the Super Clamp. It features a 3/8 inch screw at one end and a...
The Manfrotto 038 Double Super Clamp is a unit of two Super Clamps made of lightweight cast alloy, fastened together at a 90° angle. Clamps on tubes: 1/2 to 2-1/8...
The Manfrotto 039 U-Hook Cross Bar Holders is a set of two U-hooks that plug into a Super Clamp socket. Ideal for cross poles when used to support background paper.
The Manfrotto 043 Sky Hook Adjustable Gaffer Clamp is a lightweight gaffer clamp, with adjustable jaws to handle tubes from 1 inch to 2-1/2 inch. Features one fixed 5/8 inch stud, and...
This is a Manfrotto 044 Background Holder hook that will support up to 3 background crossbars or Expan Drives, when mounted onto the Manfrotto AutoPoles. It consists of two 2921...
The Manfrotto 045 Background Triple Hooks For Three Backgrounds is a set of two background paper holders that holds three Bogen Expan 046 drive units. The Triple Hook can be...
This Manfrotto 045-6 Background Holder Hooks is a set of 2 background holder hooks that support up to 6 backgrounds, when they are used with the Expan Drive system. This...
The Manfrotto 046MCB Expand Drive Set with Black Metal Chain allows easy raising and lowering of rolls of background paper without lowering the support stands. The system uses two expandable...
