Manfrotto Still Life Shooting Table Frame Without Plexiglass Panel (Black)The black-finished Manfrotto Still Life Shooting Table Frame without Plexiglass Panel consists of the aluminum tubular sections that join together to...
The Manfrotto 175 Spring Clamp is a handy multi-purpose clamp that is handy to keep around in the studio. It can be used to hold gobos, flats, or reflectors with...
This Manfrotto 045-6 Background Holder Hooks is a set of 2 background holder hooks that support up to 6 backgrounds, when they are used with the Expan Drive system. This...
The Manfrotto 043 Sky Hook Adjustable Gaffer Clamp is a lightweight gaffer clamp, with adjustable jaws to handle tubes from 1 inch to 2-1/2 inch. Features one fixed 5/8 inch stud, and...
The Manfrotto 039 U-Hook Cross Bar Holders is a set of two U-hooks that plug into a Super Clamp socket. Ideal for cross poles when used to support background paper.
This is a Set of four Autopole Foot Covers. The foot of a Manfrotto Autopole is made of black rubber, which might cause "skid marks" on light-coloured floors. This is...
This is a single Manfrotto Autopole. These single action locking cam Autopoles mount between the floor and ceiling of a studio. If the studio ceiling is higher than 12.2 feet (3.7...
The Manfrotto Black Super Boom features coaxial geared controls at the end of the boom, which permits movement a full 180°. It extends to 8.8 feet (2.7 m). Dual cranks provide...
The Manfrotto 022 Counter Balance Weight is a 15 lb painted iron counter balance weight for use with 90417 yoke assembly, or any heavy duty boom or light stand.
This set of 3 Manfrotto 018 Casters will fit a Manfrotto or any other light stand that has 22mm diameter tubular legs. Eases positioning of light stands on most hard...
Made of zinc steel material, the Manfrotto 016 Broncolor Adaptor slips over and locks onto a standard 5/8 inch stud. The entire adaptor is 3.9 inch long, and ends in a 1/4...
The Manfrotto 014-14 Rapid Adaptor is a locking adaptor that fits any light stand with a 5/8 inch top stud, and will allow vertical or horizontal mounting of a light fixture,...
The Manfrotto 059 Set of Two Background Hooks will fit the Bogen 035 Super Clamps, and are designed to work with the Expan Drive System (046). They are constructed of...
The Manfrotto 061 Joining Stud permits two Manfrotto, Avenger, Matthews or Impact Super Clamps to be joined with their jaws at six different locking positions to each other.
The Manfrotto 061RA Right Angle Joining Stud joins two Super Clamps together, and sets the jaws at 90° angles to each other. Useful for making frames or mounting heavy duty...
The Manfrotto 066 Double Female Stud is a double ended 5/8 inch diameter stud that has a 1/4 inch-20 female thread on one side, and a 3/8 inch female thread on the...
Achieve absolute control with the Variable Friction Arm with Camera Bracket . Manufactured to world renowned Italian standards, this trustworthy kit is up to any challenge. Crafted from tough but...
The 244 Micro Arm with Anti-Rotation from Manfrotto is a 5.9" friction arm with anti-rotation adapters. It features a 3/8" screw on each end and attaches to Manfrotto MT190 or...
The Pico Clamp from Manfrotto is a small yet versatile clamp that can attach to thin bars with a diameter between 8 and 15mm. The clamp has two threaded holes...
The Manfrotto 2-Section Single Articulated Arm with Camera Bracket supports 0.88 pounds at full extension. Extra versatility is also given by the sliding extension system which allows for easier positioning...
The Manfrotto Lite-Tite Swivel Umbrella Adapter is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 and 3/8"-16 male...
This white translucent Plexiglass Panel from Manfrotto has a curve in the foreground. The background may be tilted or bent upward and locked into place, to any angle up to...
The Manfrotto 330B Macro Flash Bracket weighs only 0.8 lb, has a load capacity of 2.3 lb, and allows for a camera and two shoe-mount flash units to be used...
The black Mini Still Life Shooting Table Frame from Manfrotto is an ideal choice for photographers who are shooting small to medium products like jewelry or art objects and want...
The Manfrotto 241S Suction Grip with 241S Pump Cup with 5/8" (16mm) Socket adheres to any flat non-porous surface via its 6" (150mm) suction cup. It accepts 5/8" stands, studs...
The Manfrotto 231CS Chrome Steel Column Stand with Sliding Arm is a wheeled, single column stand that is perfect for studio use. It features a spring-loaded sliding arm that allows...
The Manfrotto 231B Column Stand with Sliding Arm is a black anodized aluminum, wheeled, single column stand that is perfect for studio use. It features a spring-loaded sliding arm that...
The black-finished Manfrotto Still Life Shooting Table Frame without Plexiglass Panel consists of the aluminum tubular sections that join together to form the base for the separately purchased white, translucent...
The Manfrotto 196AC Universal Clamp can be used to grip any round tube. and has a clamping range going from 2mm to 16mm (5/8"). Ideal for use with the Magic...
The three-section Manfrotto 196AB-3 Articulated Arm supports 2.2 lbs @ full extension. Extra versatility is also given by the sliding extension system which allows for easier positioning of lighting fixtures...
The Manfrotto 171 Mini Clamp is a handy mini clamp that can be used in a myriad of ways around the studio or on location. Lightweight and sturdy, it can...
The Manfrotto 143N Magic Arm without Camera Bracket is designed to hold a light fixture in place, in a variety of situations. It is an elbow arm, with sure locking...
The Manfrotto 143BKT Camera Platform is a replacement camera platform for the Magic Arm. It has a standard 1/4-20 inch thread mount for a small camera.
The Manfrotto 123 Pivoting Boom Clamp is a pivoting clamp for use with all Super Booms and Heavy Duty Booms. Pivoting clamp for 35mm diameter boom shafts. 1-1/8" male, and...
The Manfrotto 110G Braked Caster Set features 3 wheels, each with a diameter of 100mm, with an adapter for any light stand legs that have a diameter of 22mm. They...
The Manfrotto 110 Braked Caster Set is a set of 3 75mm diameter braked wheels with adapter for any light stand legs that are 22mm in diameter. They slip onto...
The Manfrotto 109 Caster Set is comprised of 3 casters which fit on light stands with a leg diameter of 22mm such as the Manfrotto 367B, 366B and 368B. The...
The Manfrotto 102 Heavy Duty Tripod Carrying Strap (Gray) is a basic but convenient way to carry a tripod. It has a spring clip that fastens quickly to the steel...
This Manfrotto 088LBP Adapter is a 1/4inch-20 to 3/8inch adapter, with flange. It is also known as a reducing bushing; it is for use with light stands or tripods that...
These Manfrotto Background Baby Hooks are a simple and effective way to use basic stands to support a backdrop. Also known as "Baby Hook for Expan" they attach easily to...
The Manfrotto 046MCB Expan Drive Set with Black Metal Chain allows easy raising and lowering of rolls of background paper without lowering the support stands. The system uses two expandable...
The Pro Studio Rail System is a modular overhead lighting suspension system which can be expanded or modified to your requirements. It provides precise positioning of lights with ease and...
This Manfrotto 272B Adjustable Background Holder is a 3-section telescoping aluminum pole that will support paper rolls from 3.7 - 9.7 feet in width. A standard 9.5mm top attachment allows you...
Get more from you stands and securely increase their payloads with this high-quality Sandbag from Manfrotto. High-quality, portable, and versatile, it’s a smart addition to your kit that is designed to...
