Elinchrom ELC Pro HD 1000

Elinchrom has packed the ELC Pro HD 1000 with professional features we've come to expect from a flash head of this calibre and added quite a bit more. Power is continuously variable from 7 to 1,000W/s while the 300W proportional modelling lamp allows you to preview your settings before exposure. The ELC Pro HD 1000 recycles to full power in just 1.4 sec. with flash durations as short as an action-freezing 1/5,260 sec at lower settings. In fact, up to 20 frames per second are possible at minimum power. An intelligent low noise, the temperature-activated fan keeps the head cool and a pre-flash detector lets you integrate your on-camera flash into your studio system.

Since the heads have built-in 8 channel EL Skyport SPEED receivers, you can trigger them wirelessly at distances up to 393'. The transmitter trigger modes allow you to address special situations. The Sequential Mode, for instance, enables triggering up to 20 ELCs in bursts or in a continuous cycle. Delayed Mode offers a choice of first or second curtain syncing while Strobo Mode allows single frame stroboscopic action sequences.

Elinchrom ELC Pro HD 1000 Flash Head

Elinchrom has packed the ELC Pro HD 1000 with professional features we've come to expect from a flash head of this calibre and added quite a bit more. Power is continuously variable from 7 to 1,000W/s while the 300W proportional modelling lamp allows you to preview your settings before exposure. The ELC Pro HD 1000 recycles to full power in just 1.4 sec. with flash durations as short as an action-freezing 1/5,260 sec at lower settings. In fact, up to 20 frames per second are possible at minimum power. An intelligent low noise, the temperature-activated fan keeps the head cool and a pre-flash detector lets you integrate your on-camera flash into your studio system.

Since the heads have built-in 8 channel EL Skyport SPEED receivers, you can trigger them wirelessly at distances up to 393'. The transmitter trigger modes allow you to address special situations. The Sequential Mode, for instance, enables triggering up to 20 ELCs in bursts or in a continuous cycle. Delayed Mode offers a choice of first or second curtain syncing while Strobo Mode allows single frame stroboscopic action sequences.

Features

• Built-in EL-Skyport receiver for triggering
• EL-Skyport with 8 frequency channels with 4 groups
• EL-Skyport Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
• Intelligent pre-flash detector system to enable the use of ELC units with speedlights
• 8 f-stop range
• Action-freezing flash durations of 1/1,430 @ full power (t0.5) and as short as 1/5,260 sec. at 80W/s
• Stable even at fastest recycling times
• Up to 20 flashes per second
• Consistent colour temperature with +/- 150K
• Power Auto-dump
• Multi-voltage auto-detection: 90-265VAC excluding modelling lamp
• Low 5V sync voltage safe for all digital camera systems
• The intelligent low-noise fan spins slower or faster depending on the internal temperature of the unit
• Impact-resistant and fire-retardant body shell
• Accessory bayonet permits use of the complete range of light modifiers

The Elinchrom Standard

• OLED display for information and clarity
• Dashboard for an enhanced experience
• Precise control

Flash Modes

• Sequence Mode allows you to sequentially trigger up to 20 ELCs, in bursts or as a continuous cycle to utilize the high frame rate of your camera
• Delayed Mode provides the option of first or second curtain sync and everything in-between
• Strobo Mode allows you to take a picture with stroboscopic effects in a single frame